Jump to content

ATTAK Z

Members
 View Profile  See their activity

  • Posts

    12,618

  • Joined

  • Last visited

 Content Type 

Everything posted by ATTAK Z

  1. ATTAK Z
    Jag F-type ?
  2. ATTAK Z
    you missed a
  3. ATTAK Z
  4. ATTAK Z
    Just a youngster then
  5. ATTAK Z
    The 300 PS engine was quite a lot different from the 280 ... there were some internal changes to valves etc. to allow it to rev higher IIRC ... I don't know what I'm talking about really but I do know that it wasn't just a remap !
  6. ATTAK Z
    what's it like flying with the Red Arrows ... I thought you were all in Cyprus at the moment
  7. ATTAK Z
    From memory they are too small for your application ... could be wrong though
  8. ATTAK Z
    Check out prices before you strike a deal ... the difference could be as low as £600.00 for a DE against a rev up with the same mileage and condition
  9. ATTAK Z
    As we thought - non rev up
  10. ATTAK Z
    Also if the colour is Kuro (as the ad says) rather than Ebisu then it's deffo a non rev up car
  11. ATTAK Z
    the 296 bhp rev up was called a 300 because the power output is 300 PS or Pferdestärke (horse-strength in German)
  12. ATTAK Z
    rev ups were available from 17/02/06 to 31/03/07 iirc
  13. ATTAK Z
    Road tax will be at the higher level if it was registered after 23/03/06
  14. ATTAK Z
    IIRC, even a rev up is only 296 bhp
  15. ATTAK Z
    although this is advised a TC system work on the speed difference on each axle so if you stay between the percentage difference in size irrelevant of the oem between each angle vdc etc will be fine agreed
  16. ATTAK Z
    Is the rear plate square ?
  17. ATTAK Z
    PS ... you can't delete posts on this forum
  18. ATTAK Z
    JDM
  19. ATTAK Z
    You might be surprised at the cost !
  20. ATTAK Z
    ZmanAlex sells coloured callipers iirc ... give him a PM
  21. ATTAK Z
    Rolling radius of both front and rears should not differ from OEM by more than 2.5%
  22. ATTAK Z
  23. ATTAK Z
  24. ATTAK Z
  25. ATTAK Z
    Thanks Graham - we'll have a look at that
×
×
  • Create New...