Husky

But as I am in the picture too surely I have some say on who I show it to? no, the public are already fully aware of your activities so the picture will be no surprise there, my part is to remain secret. The "greased ninja" is only for special occasions... i've already said to much

really love this!!!!

I told you Dave, I dont just show it to anyone.

yeah, apparently axle grease and KY aren't interchangable who'd of thought, AND they didnt like my supporting pictorial evidence either

so very true! i hate pistonheads with a passion and i only started one thread with a genuine question

no worries, just wanted to point out it was frustrating for us lot really. no un holy forum war here just putting my hand in the air asking a question of sorts. I don't like the petty stuff either seen it all before really.

Can there please be a rule where no one, including mods and admin can post in a locked thread unless it is to say "locked" or "unlocked" it happens time to time and its crap that one side can speak while the other can't. I'm sure i'm not the only person that gets cheesed off by the lower forms of life not being able to post. That is all

these pictures give me that warm fuzzy feeling only a giant pile of car mods can loving the teins!

as suggested, pick up a scorpion

:pmr35lee:

+1 I went to uni there, many many good times

indeed but hey, you could give it to your missus as perfume afterward I would agree though, for a single set of lights it is rather pricey, the pot will likely last me hundreds of sets as you hardly use any.

this is what I use on customers lights, its absolutely brilliant smells awesome too!! meguiars plastic X is another option but not as good. I have tried the metal polish out of curiosity before but its not as good.

On that point does an aftermarket strut brace need this only the one's i have seen dont seem to have anything like the standard one. Or do they just bolt to the inner wing? i think thats the thing, nissan did a good job first time round, it might be uggly but it did the job, all these aftermarket struts non of them say they improve the handling of the car, its just engine bay tart ware. and yes i had one fair enough it will make a difference if there was nothing there in the first place like on a lot of cars, but on the zed i don't think it makes any difference. or maybe possibly worse. as they don't allow for fine tuning But my question is now does the pressure that the standard one applies across the inner wings make any difference to the handling and flexibility of the body when quite clearly aftermarket one's dont the car feels floppy under hard cornering without one all together

actually is sounded like it had a split exhaust, dont ask me why, it just sounds like that. but yes, it sounds really f***ing bad

Lee has said the seals around the spark plug gallery are prone to failure so that will probably be your leak. My leak was the breather hose fixing (the white one) was cracked) I found those same bolts a nightmare but with with one of these handy buggers it only takes 60 seconds to do Always best to take the plenum off when you are working to give as much space as possible. Having learned from the previous two times, the final time i did it i replaced all the stock horrible clips with jubilee clips which are far easier to use in the confined space. I had to do it twice because i managed to slightly unseat the rubber gasket right at the back where you cant get your hand in. it carved the gasket in half and it just pi**ed oil on start up. sorted (for the most part) now though.

my spacer is so thick i have to adjust it by eye to keep it off the plenum and still allow the bonnet to close, and after a drive readjust it as it settles a bit. You dont want it rattling off your plenum... it sounds realllllly bad, trust me.

I was watching tokyo drift in my car tonight to test a further mod to my bose, it sounded so awesome that i kept watching all the way through. The sound quality from the hack is far superior to the cd player running from an HTC, I'm no expert but I asked a guy at work and it's apparently to do with the HTC having a better ability to translate analogue and digital than the crap clarion headunit (he mentioned DAX???). So my only problem was the desire screen was a bit small, eagerly awaiting the bigger screen with movie capability. What will be involved for internet access, is this just an off the shelf plug in dongle?

can you not compress it using the measurement to the upper plenum as your guide, as long as its 10mm or above between the bar and the plenum you should be fine.

Yes, we aren't the normal type of bad men ricey hangs out with, there are no whips and handcuffs here.

speak to RTbiscuit regarding the hydrographic printing

you can report them remember, take the number and keep well away from them.

I took my driver side off and replaced it twice this weekend, it's not the first time i have done this crappy task, its just plain awkward!!! hope it went well for you and you didnt have too much of a nightmare seating the rubber gasket properly

You would probably be better getting a crow foot socket and torquing the bar up using a torque wrench as per the workshop manual. the distance may be different for each car produced at different times due to the tolerances in manufacture. http://www.350z-tech.com/wiki/index.php ... stallation