Husky

cheers martin, i found this section but i dont think it does quite what i want Display images within posts: Yes No Display Flash animations: Yes No Display smilies as images: Yes No Display signatures: Yes No Display avatars: Yes No

is there any way on firefox to block specific images on websites. for example, parts of the banner at the top of the forum. styles/350Z/theme/images/midr.png and styles/350Z/theme/images/midl.png it would make the site less.... obvious

to find exactly what the max pressure is before it distorts the boot lid from the roof line noob

i do it all the time, mainly becasue the zeds instrument cluster is always lit so you dont notice from tyhe inside, that is until you get out of the street lighting.

i dont see how them being stupid is your fault what it does show is that when they don't know they just completely bullshit you

sounds good quite jealous they look like really nice hotels too.

Like i say the vreds have a very round shoulder, the MPS2's i have in the garage look much wider only due to a different shoulder shape.

Oh you just wish that didn't happen on these cars.... Sadly some people who produce things for 350z's think it's ok to wire things up this way. I spend far too much time on other owners cars with a soldering iron fixing these "attempts" for them

Many people have this exact issue and put up with it, but thats your call. When you have driven a car with a faultless gearbox this feels wrong but thats just my opinion. if it clicks as you are travelling along its probably worn CV joints, make the garage REPLACE them, NOT just flip them over if it is only when you go over bumps and potholes and could be described as a clunk then it could be ARB drop links, again get these replaced. well it means it has had the expensive service early, so i would probably just crack on from where a P3 would leave you which makes your next a P1 then P2>P1>P3>P1 Shows how much Nissan know their own product as the zed has a chain not a belt and you wont need to change it glad you enjoyed it

i managed to balls up my renewal and took out two policies to the tune of 1600 quid phoned them today and they had it all sorted really quickly and now i have only one haha

the vreds have a very round shoulder, indeed they are 10.5 wheels. in person they don't look that streched, i think its more to do with the shape of that particular tyre. the caps i took off before going so they didnt lose them 285 is pretty fat on my 10.5"s, 305 would be just silly. Yes, judging by the fact they quite clearly can't read, I wouldn't put that past them what brand of tyre have you got?

the vreds have a very round shoulder, indeed they are 10.5 wheels. in person they don't look that streched, i think its more to do with the shape of that particular tyre. the caps i took off before going so they didnt lose them

nope that was indeed me they need a tiny refurb anyway, that wheel is the worst obviously becasue of the kerbing though.

So i went back and told the boss, who went through the back, shut the door and began giving the kid a right bollocking which i could hear even stood outside so he did it all again flipping the tyre round and then started to put lots of weights on the wheel, when he got to something like 70g and had 40g still to go i told him to take it off and turn the tyre round so the heavy spot from the repair doesnt line up with any heavy spot on the wheel. or check how it was mounted to the machine. sure enough he hadn't mounted it properly, after spinning the tyre round a bit and correcting the mounting it only needed 20g of their ugly cheap ass weights.

im going back there now in the zed which i drove into work today. VERY slowly i might add, such a dodgy drive! I'm actually going to have to let them touch my car

The tyres are 295 wide 305's will be going on next because of the rediculous number of "you shouldn't stretch tyres" coments! These are the tyres I have had on for a while, I would never buy tyres from them, what a sickening thought. Considering I was standing near him the whole time too. He decided it was a good idea to change the worn shoe before doing it just incase. wonder if he would have done that if i wasnt there. again, I didn't buy them from there, they were from camskills, and i bloody wish I could get tyres to their shelf life These have only been on 9 months or so and they are nearly gone. Sadly my wheels dont fit on mobile tyre fitter machines I put it on the car and then looked at how annoyingly grubby my sidewall was. That was when i noticed, didn't drive on it at all. No, I only took the wheel to them in the boot of the shed car, I'm not letting them drive my car!!!

wheels need a refurb too for the small kerbing on them you can see considering this guy was trying to talk me into getting the zed alignment done with them... uhhhh hu.... swivel on it i say

I just cleared it for the forum only and it worked fine

I'm just getting the car ready for show season. once its ready I'm definitely up for it

That was great

so this is the punishment you get for taking a single wheel to national tyre thing place of doom and destruction noob lsnd hate hate hate. I had a puncture and this is what they did...

wtf does that even mean! "we cant be arsed so lets ignore it until it goes away la la la la"

"Looks like you've been missing a lot of work lately. " "I wouldn't say I've been missing it, Bob." F**kin' A

I find myself using the phrases "networking", "error state", "discussion offline", "compressed timeline", and other evil phrases. But while I do, I find myself using them in a way where it feels like a second language not part of my first. I am secretly laughing at people for using them with passion and meaning. quite often I spend my time in the workshop, where telling your fellow employee "your mum is so ugly, that she made a blind kid cry" is an acceptable form of banter. The best thing to do is watch the recommended film for all people who work in an office as mentioned above and then take a nice relaxing deep breath and lean back in your chair

haha love it mate, top work. Watch the film "Office Space" you will absolutely love it bud Apparently the guy is me AND Congratulations on your 1000th post!!!!