BladesGrant

I was going to say that they are old but really it's not that long ago, really need to stop changing it!!!!

Hopefully one less after Saturday if this one is bought. I think there are more Zeds per head in Leamington then anywhere else!!!

Got plenty but can't post them up yet cause in my iPhone, will post some later this evening.

I might put all my stock bumpers back on so he doesn't get into trouble with the missus for his wish list!!

kev you have a PM. Cheers for the text Mitz.

Can't make this as it's my 30th that weekend.

All sorted now, got an OEM airbox on. Thanks Sarnie, you know what they say it's the thought that counts!!

Hopefully someone won't need an intake until tomorrow afternoon or has a spare OEM one knocking around. I don't want to cancel on Mark this late in the day especially as it will take me another month or so to get booked in as they are so busy!

Although definitely not standard not much has been done to the engine so shouldn't be a problem in terms of performance and sound expectations. I do have an aftermarket exhaust but its not a crazy one!! Nearly everyone starts out with a standard one but that changes quickly around here!! There is a West Midlands meet in July, put your name down for that as there are a lot of cars down so far so will give you a good set to look at.

Nice try but I don't fancy pushing it there!!!

Hello and to the forum. I am in Leamington Spa so very close by and would be happy to let you look round my car. I will add that its far from standard though!! Good luck with the hunting. Grant

Hey guys I need an urgent favour if possible from someone in the West Midlands area. I am due to go to Abbey first thing in the morning but I don't have my intake pipe. I am having the paint code read so I can colour match some things. Just got back off holiday yesterday and its not back with me so my car is going nowhere unless I can either................. A) get hold of a K&N typhoon intake pipe (will be bloody lucky me thinks!!) or Hope someone has a standard airbox knocking around so I can borrow it for a day. Not ideal as it won't be tuned with what the car will be running daily but its only the intake so I am figuring it won't make that much difference. If anyone can help me out in the area please give me a shout on here or drop me a text 07808767389 (no dirty texts (unless you're female obviously!!!)) Thanks Grant

Falken452 is a popular choice on here. Try Camskill website for good prices.

I also end up spraying the wind screen alot by mistake as everything is on the other side to the Mondeo so if anyone sees a crazy man washing his windscreen and wipers going like the clappers that means hello!!!!

The vital Mr Muscle is looking a little low Martin!!

I always give a flash and a wave, even in the Mondeo which is probably when I get a WTF look back from the other Zed driver!!!

Emergency over, both Ross and I are away for two weeks so allllllllll good. Thanks for the advice though.

Need these urgently as mot at home and trying to arrange a courier before flying tomorrow!! Any help appreciated

The 285 on the rear will be fine for 10" wide wheel. Would have thought you would want to keep the side Walls the same front and rear. Mine are 30 all round on a 20" alloy.

I have a standard front bumper in GM.

Are you selling your polished bottle?

Wasn't there a build thread of this somewhere? Thought I remember seeing all the metal work for the arches before being sprayed, either that or I imagined it!!

If you do go down the route of tuning I think you could then also sell your throttle controller as the tune will give you 100% throttle and I believe you don't need this then. A little back towards the tune.

K2 is definitely legal and you won't have any troubles with it what so ever. The K2 is similar to stock until you get above about 4k revs then it makes a good noise!! If you are after a stock UK exhuast then try R35LEE or ZMANALEX. The JDM exhuast is quieter than UK so if going for stock then make sure its a UK one.

The kit comes with complete brackets and struts. Nothing additional required to fit. It just won't be the correct pressure for a carbon bonnet I would have thought as its pretty much spot on for my aluminium one. Would have thought this was too much pressure for a carbon hood, sure its not a hard job to release some of the gas though.