Hi,
I went to have my tracking sorted yesterday but the chap said that the bolts had seized up and needed to be replaced ...
I assume they are the same but it's the drivers side that's causing the problems ...
Does anyone have any lying around?
All you are trying to do is smooth out any nick/scratches and give the paint a good surface to bond with.
I used 2000 grade (wet) all over. Give it a good wash after and dry it thoroughly. Then used Halfords Plastic Primer (three coats) with a VERY light (wet) rub down after final coat.
I first used Halfords Vinyl paint - but that came out WAY too shiny!!!!
So I simply top coated over that with standard Halfords Matt Black - which actually came out as an OEM satin finish. Three tops coats as I recall and job done.
David
That's exactly what I was after ... Thanks!
I've got some halfords matt black left over from when I did my wiper arms ... so all I need is the plastic primer and the sand paper ...
I'll post some before and after pictures once I've done it ...
Hey,
I was going to do my window switches this weekend but wanted to know what grades of wet and dry paper I should be using ...
Any advice would be much appreciated