scottsoulby

Bit of an update: patrick has been round to my house to collect measurements for the spacer, he has told me the top of the plenum is now completed, and the bumps and holes are all smoothed, the sides are being done then is just a case of completing the underside, which he said isn't a problem, so apparently we are all in order for the mould to be finished next week with a hopeful finished product at the end of the week or the start of the next finally getting back on track, an oem induction pipe may also be getting made to compliment the plenum

Cheers buddy, patrick who's making the plenum has just been round to my house with some good news so I'll update the thread soon

Yeah they are quite expensive, but then again I'm doing mine cheaper than normal mainly so you his don't loose back due to bad traders, I'll have to put up the price a bit once this group buy is over so get in on this one, also as usually the carbon will be 1mm twill so will suit the carbon brake/battery covers and surrounds I sell

cheers Wayne, let that be an inspiration to you all 2. Bladesgrant 3. Vik54 4. JT1703 6. Tonser 7. shieldsie 8. Spaceman 9. Nrenz123 10. SunGodRA 11. chrisjones6699 12. N!ck-z 13. Dan4 14. Cragus

They are very similar, except mine will have the sides to make it look like they are replacements, the eBay ones you can always tell they are stuck on,

There's a picture about somewhere, I'll try find one unless anyone has one already to put up?

No worries mate, they will always be available

Hi guys, first of all my apologies for the time taken on these, the company had a death so has been a bit slow recently, however these are now on for moulding so we should have the first set in the next couple of weeks, a new lower price to compensate, I should be able to push these out at £55 + delivery if people wish to add there names you still can

Hi guys, good news; I've put the engine cover in for moulding today, so we should have the first one completed in a couple of weeks time, bad news; the tech carbon unbelieveably low price cannot be matched, however I'm not too far off, I might be able to push these out at £80 + delivery, compared to techs £65 and that's me pretty much making enough to recover my mould price and enough for a few beers if people still wish to add there name to the list, go ahead, and the same goes to the people who decide they don't want to purchase this is the list at the moment: 2. Bladesgrant 3. Vik54 4. JT1703 5. Cookiemonster 6. Tonser 7. shieldsie 8. Spaceman 9. Nrenz123 10. SunGodRA 11. chrisjones6699 12. N!ck-z 13. Dan4

Hi guys, this is the list from the old group buy, seemed a waste to forget about it, one trader messed up and it's not very good that you guys miss out because of it, so I'll take it over, not 100% sure how much they will be but I'll try get as close the original price as I can even though it was silly cheap, I'm looking at sending my cover in for moulding pretty sharpish. 2. Bladesgrant 3. Vik54 4. JT1703 5. Cookiemonster 6. Tonser 7. shieldsie 8. Spaceman 9. Nrenz123 10. SunGodRA 11. chrisjones6699 12. N!ck-z Thanks Scott

If you spend alot of time in leicester contact CS he will be able to sort you out, the nismo bumper is fibreglass so should be an easy fix dependant on damage, I've just had my bumper all sprayed and all the cracks taken out, also debadged just to give you extra ideas

I can't imagine it will get sorted mate, he's in court today facing charges of fraud, he's been on the run for 4 years with 6 warrants of arrest to his name, he's pleaded guilty So looks like he will go down, I've just been reading it all on celica club,

Hi mate, no my supplier is not tech carbon, so no worries

Hi, bad news about Jamie(tech carbon) it's been an on going problem on celica club for a long time now, The problem with this buy is that tech enticed everyone with his low prices and got all your money then never delivered, I'll do my best to get the best price I can so everyone here doesn't lose out because of a bad trader, Ill either pop in today or Wednesday and get a price and if your all happy I'll get on with it straight away that's obviously if carbon coops isn't trying to find another supplier and still wants to go ahead with his plans

im in exactly the same situation as you, ive just had my nismo bumper debadged, and the number plate holes filled in and all sprayed, at the moment my plate is in the window, think ill only get away with it for a short while

You have pm I'll try ring you tommorrow or Friday night

Hi mate, i've been told recently that it should only be about 8-10 working days, but I'll believe it when I see it, when's the ace cafe meet?

I can get it copied, but I just need one to do so

Hi guys, just an advertisement to those of you with motorbikes, i can now get my hands on carbon fibre parts for a fair few motorbikes, if you would like anything from the website, get in touch with me, i may be able to sort a members discount http://www.bikefairings.co.uk/ thanks Scott

as always mate, i wouldnt sell them if they were bad

1. Scott 2. Shaun1982 3. Jerry3167 4. Clarkie34 5. Xendric 6.

It was me that did it before I bought a performance exhaust, it dies make a big difference, it popped alot, made it louder and it made it quite raspy top end, doesn't sound as good as an aftermarket but it was alot cheaper, Don't know it if I was just me though but it felt like like it lost some torque low down

Bump for some sales, another set ready tomorrow

Bump for some interest

1. Scott 2. Shaun1982 3. Jerry3167 4. 5. Cheers mate, then Ill pop over and pick it up if Ive got some surrounds and covers in stock I'll bring them over and show you