popeacute Posted May 3, 2015 Posted May 3, 2015 Just looking to verify something. I fitted cookbots folding mirror mod back in 2011. But recently just got car back from garage and now it doesn't work. But instead the mirrors opening and close with a turn of the ignition key on and off. Were the zed's always able to do this i can't remember? Just wanted to know before checking the fuse and cabling of the mod. Quote
glrnet Posted May 4, 2015 Posted May 4, 2015 Check the rocker switch under the mirror adjusting button isn't down left I think, it should be in the mid (neutral position) Quote
popeacute Posted May 4, 2015 Author Posted May 4, 2015 Yeah it is in the middle. It does it when the switch down to the right and in the middle. Quote
ilogikal1 Posted May 4, 2015 Posted May 4, 2015 Were the zed's always able to do this i can't remember? Just wanted to know before checking the fuse and cabling of the mod. It's not a standard feature, no. In standard guise the mirrors only fold with the use of the switch. Quote
popeacute Posted May 4, 2015 Author Posted May 4, 2015 They were changing the clutch so had the centre console up. Quote
JetSet Posted May 4, 2015 Posted May 4, 2015 Were the zed's always able to do this i can't remember? Just wanted to know before checking the fuse and cabling of the mod. It's not a standard feature, no. In standard guise the mirrors only fold with the use of the switch. On U.K cars you're right but I think it was standard (or maybe an option?) on JDM's. Pete 1 Quote
popeacute Posted May 4, 2015 Author Posted May 4, 2015 Mines a uk car. So guessing it's maybe a fuse causing it to behave this way? Quote
JetSet Posted May 4, 2015 Posted May 4, 2015 My bad, so he did Yeah, paid him for the mirror mod but he never sent it to me Pete Quote
flyboy Posted May 4, 2015 Posted May 4, 2015 Mines a uk car. So guessing it's maybe a fuse causing it to behave this way? Sounds like one of the relays has gone on the board. I would take it out and see if it all behaves properly as stock. Quote
Adrian@TORQEN Posted May 4, 2015 Posted May 4, 2015 I just binned 1 module the other day I think knowing the Mart does them now on here, a better version... Quote
Jixaman Posted May 8, 2015 Posted May 8, 2015 My JDM is on a 3 way switch, close, open and automatic as in with the ignition... Quote
narcotix Posted May 8, 2015 Posted May 8, 2015 I have the exact same problem as you've described in your original post.. I've had it installed for years without problems and then after a trip to the garage to have the steering rack replaced it's changed to only work with the ignition.. I checked the wires in the door for any loose connections but it didn't help.. Quote
popeacute Posted May 26, 2015 Author Posted May 26, 2015 (edited) well for anyone else, finally with bank holiday got around to looking at drivers window and to check the mod out for faults. Fuse wasn't blown on board, but the micro switch had fallen off where is was mounted for this to work ,,,doh!, easy fix with a bit of glue, garage must have been slamming the car door for it to dislodge. . Window motor was another issue though...bloody carbon brushes. Edited May 26, 2015 by popeacute Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.