gstraw Posted October 9, 2014 Posted October 9, 2014 Hey I've lowered my car and the beam pattern is now apparently very low since the front dropped more than the rear. Is there a way I can manually make the beam higher from the bonnet so effectively resetting the datum? Thanks Quote
Randy_Baton Posted October 9, 2014 Posted October 9, 2014 There is a screw towards the back of the light that does it. There is a thread on hear that describes it in better detail. If you do it, do it in the evening with you car facing something so you can see the impact real time Quote
Ebized Posted October 9, 2014 Posted October 9, 2014 There is a screw towards the back of the light that does it. There is a thread on hear that describes it in better detail. If you do it, do it in the evening with you car facing something so you can see the impact real time You know that to be the case for a 370? 2 Quote
WhackyWill Posted October 9, 2014 Posted October 9, 2014 Second time I have posted this today..What going on.. !! :scare: http://www.hypersprite.com/auto/tech-z-003/index.asp Quote
WhackyWill Posted October 9, 2014 Posted October 9, 2014 Second time I have posted this today..What going on.. !! :scare: http://www.hyperspri...z-003/index.asp Ouch..!! Forget the above, just realised its for a 370z..I'll leave it up as it may be of use to somebody.. Quote
flyboy Posted October 10, 2014 Posted October 10, 2014 Raised my beam as it was way low when I got it. Adjuster screw under the rubber between the light and the wing if I remember right Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.