Arran Posted March 4, 2014 Posted March 4, 2014 Hey all Does anyone know if a lead to go from the obd2 port to an ipad air so I can use dash command? Searching everywhere only brings up blue tooth or wifi stuff which I dont need. Cheers Quote
KyleR Posted March 4, 2014 Posted March 4, 2014 Does dash command not work with wifi? If it does just get a wifi one and leave it plugged in, no messing about plugging things in and out all the time. Quote
Arran Posted March 4, 2014 Author Posted March 4, 2014 Does it mean that I can only use it on the drive so I get wifi lol Quote
KyleR Posted March 4, 2014 Posted March 4, 2014 (edited) No, the unit provides the wifi signal so you just have to connect to the obd network in settings. I use the iobd2 unit with the accompanying app for plotting where I've been and average speeds etc, all connected via wifi. Edited March 4, 2014 by KyleR 1 Quote
Arran Posted March 4, 2014 Author Posted March 4, 2014 Ah so one of those eBay cables with the wifi box will work. Hopefully dash command or similar works with wifi Quote
KyleR Posted March 4, 2014 Posted March 4, 2014 Usually it's just a plug without any cable but yes, they'll work fine, providing the app works with wifi. I bought the iobd2 stuff because the plugin d app are made to work with each other. Not used dash command so not sure if it has any functions that iobd2 doesn't, but give it a google. Quote
Arran Posted March 4, 2014 Author Posted March 4, 2014 Ordered both bluetooth and wifi obd2 modules, see what works when they arrive Quote
KyleR Posted March 4, 2014 Posted March 4, 2014 I do t think Bluetooth works with apple stuff, but worth a go Quote
Arran Posted March 4, 2014 Author Posted March 4, 2014 Realised that after I ordered lol oh well I can use it with android stuff and the wifi one with apple Quote
Ekona Posted March 4, 2014 Posted March 4, 2014 Don't leave the cable/box plugged in, the socket is permanent live so you'll drain the battery Quote
KyleR Posted March 4, 2014 Posted March 4, 2014 Don't leave the cable/box plugged in, the socket is permanent live so you'll drain the battery Really? Then why does the throttle controller that's plugged into it turn off with the ignition? My iobd has a led on it, I'll check if it's on when I get home to the car. Quote
Ekona Posted March 4, 2014 Posted March 4, 2014 Might just be the wifi bit, but my one definitely stays on with ignition off. My throttle controller did used to power off though, you're quite right. Quote
Daryl Posted March 4, 2014 Posted March 4, 2014 The OBD thing i have stays on when you switch off the ignition Quote
Meeerrrk Posted March 4, 2014 Posted March 4, 2014 I use a wifi one with my ipad / iPhone. PITA to get connected first time, lots of googling etc, but it works fine now. I think it does say powered, I noticed the lights still on after I switched off the car Sent from my iPhone using Tapatalk Quote
Stutopia Posted March 4, 2014 Posted March 4, 2014 I did not know it stayed on... RUNS OUTSIDE UNPLUGS RUNS INSIDE Thanks fellas!!! 1 Quote
Arran Posted March 4, 2014 Author Posted March 4, 2014 Ive gone for elm327 wifi and bluetooth ones, hopefully they'll connect up ok first time round Quote
Meeerrrk Posted March 4, 2014 Posted March 4, 2014 Ive gone for elm327 wifi and bluetooth ones, hopefully they'll connect up ok first time round Good luck with that I spent a good hour dicking about with IP address which means very little to me, just lots of numbers and decimal points Sent from my iPhone using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.