Arch rolling

[Hennerz]

Hi all,

 

Does anyone know how much it would cost to get my arches rolled and know where I can get it done

 

I am based in Hertfordshire but willing to travel

[Flex]

Hasn't someone just listed an arch roller for sale?

 

If you're brave enough

[Pete87]

I had arch enemy do mine was £90 for the rear arches and they come to your work or house.

http://www.archenemy.co.uk/

[Humpy]

Hennerz why you needing arhces rolled, have you lowered your car or running spacers???

Edited June 4, 2013 by Humpy

[Hennerz]

Going to be running 20mm spacers all round and will be lower eventually

[Humpy]

Was going to say I ddint need my arches rolled with those wheels lol, with 20mm they are going to poke out nicely

[Hennerz]

Hahaha, i am hoping so They are going off for refurb this weekend and getting fitted at the same time, plus a few added extras

[Voodoo Vix]

Check your fitment before you consider getting them rolled, mine's lowered 30mm with 19x10.5 Rears Et 21 and 19 x 8.5 Fronts Et 40, the fronts have 20mm spacers, the rears being wider don't need them, but with the Rays I run 20mm spacers all round with no scrubbing.

 

If you get your arches rolled check them for dirt and water regularly as it sits in the roll and eventually rots them away, a lot of places cut them rather than rolling now because of this (gives a much smoother finish too).

[Hennerz]

Thanks for the advise Vix WIll test them on Saturday

[tez162003]

Just got a mate to do mine, make sure your arches don't have rust on the inner lips as it could split the metal when folding it over.

 

My set up is 19x10.5 et-3 so I can safely say I needed them rolled haha

[Hennerz]

Will be running 18"rota's 9.5 and 8.5 ET 30 with 245 and 225 tryes with 20mm spacers all round. do you think these will need rolling?

Edited June 4, 2013 by Hennerz

[KyleR]

30mm drop, 19x9.5/10.5 et 20 running 245/35 and 275/35, I needed them rolled, possibly pulled a little when I correct the camber to where I want it.