se350z Posted December 23, 2011 Posted December 23, 2011 Hi everyone im going to service my car tomorrow and i was wondering how many litres of antifreeze do i need to put it when changing the water? Quote
glrnet Posted December 23, 2011 Posted December 23, 2011 It very much depends on the level of protection you want, check what the anti freeze manufacturer recommends, you should find details on the container. Quote
Dblock Posted December 23, 2011 Posted December 23, 2011 I think its 10 or 11 litres for a full flush. I would need to check though. Quote
glrnet Posted December 23, 2011 Posted December 23, 2011 Here's the ratio of anti freeze to water guff:- http://www.ehow.com/how_2188874_mix-car-coolant.html Quote
Dblock Posted December 23, 2011 Posted December 23, 2011 Here's the ratio of anti freeze to water guff:- http://www.ehow.com/how_2188874_mix-car-coolant.html Different manufacturers will have different diluation ratios. Also OP might be buying it ready mixed. Quote
se350z Posted December 24, 2011 Author Posted December 24, 2011 It very much depends on the level of protection you want, check what the anti freeze manufacturer recommends, you should find details on the container. ^ i just checked it and it says mix/propotion --- protection 1. bottle (antifreeze) + bottle (water) + bottle (water) --- -20^C 2. bottle (antifreeze) + bottle (water) --- - 36^C I guess option number one should be ok, because i believe we wont see -20^C however how many litres of water do i need to put?, for example if its 9 litres, i will be putting 6 litres of water and 3 litres of anti freeze with summer coolant. Quote
Dblock Posted December 24, 2011 Posted December 24, 2011 It very much depends on the level of protection you want, check what the anti freeze manufacturer recommends, you should find details on the container. ^ i just checked it and it says mix/propotion --- protection 1. bottle (antifreeze) + bottle (water) + bottle (water) --- -20^C 2. bottle (antifreeze) + bottle (water) --- - 36^C I guess option number one should be ok, because i believe we wont see -20^C however how many litres of water do i need to put?, for example if its 9 litres, i will be putting 6 litres of water and 3 litres of anti freeze with summer coolant. I saw -17c last year but Im in Scotland. Quote
HassanZ Posted December 24, 2011 Posted December 24, 2011 The full capacity is 8.7 litres. I purchased 'premix' coolant from Nissan so there was no stress about diluting the coolant with distilled water... Quote
ZMANALEX Posted December 24, 2011 Posted December 24, 2011 If you are flushing the system then you will require 2 x 5 lts of Nissan Pre Mix. Otherwise a you will be safe at a 50/50 mix. Alex. Quote
se350z Posted December 24, 2011 Author Posted December 24, 2011 If you are flushing the system then you will require 2 x 5 lts of Nissan Pre Mix. Otherwise a you will be safe at a 50/50 mix. Alex. The full capacity is 8.7 litres. I purchased 'premix' coolant from Nissan so there was no stress about diluting the coolant with distilled water... thanks for the help, i know what to do now Quote
se350z Posted December 24, 2011 Author Posted December 24, 2011 I changed the water, but it gives cold air from heater any ideas what i done wrong? Quote
Neilp Posted December 24, 2011 Posted December 24, 2011 I changed the water, but it gives cold air from heater any ideas what i done wrong? air lock Quote
stubzie83 Posted December 24, 2011 Posted December 24, 2011 I changed the water, but it gives cold air from heater any ideas what i done wrong? air lock +1 When I did mine it was an absolute pain to get the air out of the heater matrix. I found the best method was to raise the front of the car up so that the radiator cap was above the air bleed valve. You can then force coolant into the heater matrix and the air eventually comes out of the radiator. It takes a while, a lot of massaging coolant hoses and a lot of cursing to get done. Quote
Dblock Posted December 24, 2011 Posted December 24, 2011 I think cefiro drifters way is the best IMO but it's the same thing. Quote
se350z Posted December 25, 2011 Author Posted December 25, 2011 I changed the water, but it gives cold air from heater any ideas what i done wrong? air lock +1 When I did mine it was an absolute pain to get the air out of the heater matrix. I found the best method was to raise the front of the car up so that the radiator cap was above the air bleed valve. You can then force coolant into the heater matrix and the air eventually comes out of the radiator. It takes a while, a lot of massaging coolant hoses and a lot of cursing to get done. I changed the water, but it gives cold air from heater any ideas what i done wrong? air lock thanks for the reply guys, its all done now,,, MERRY XMAS Quote
Dynamic Turtle Posted February 9, 2012 Posted February 9, 2012 Thread gravedigging.... Is anti freeze used to prevent cracks from happening within the engine due to expanding ice water? Or is it because you guys are acutally crazy enough to use a 350z when it's -20c outside? Sorry, auto noob question I know. Quote
John tarantula Posted February 9, 2012 Posted February 9, 2012 Is anti freeze used to prevent cracks from happening within the engine due to expanding ice water? this Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.