JWT fitting

[alessandro]

I soon should recive a JWT, and debating if I should fitted my self which would be more rewarding ( I'm easily pleased ) or take it somewhere to be fitted? G

Got the Guide on how to do it, but, when I tried to fit a K&N on the golf I ended up driving to the nearest garage with both OEM ans K&N filters IN the car and a big gap in the engine bay.

[gunmetalzgt]

You alright mate?

 

Should be there tomorrow.

 

Its quite easy to fit yourself. i left most bits together anyway so it will be obvious what goes where.

 

it took me about 15 mins to remove it and put the oem airbox back so it shouldn't be too hard.

 

If you were closer i would have done it for you

[rtbiscuit]

lol do it yourself, its dead easy, or if your worried get a mate to help you. if you were more local to me i would say bring it round and i'll help you.

 

offers still open but its a bit of a drive to suffolk.

[alessandro]

Thanks guys,

 

I might try to give it a go my self and get the guys from Japex to be on stend by............. again

[Ian]

It depends how confident you are doing it yourself

 

I always used to pay to have things fitted & this is the first car that I have actually done DIY on. The popcharger was the first mod that I did, aslong as you take your time & read the instructions carefully then you will be ok

[SunGodRA]

It really is a piece of cake - 15 mins max

[BulletMagnet]

It really is a piece of cake - 15 mins max

I did jerrys in 10, hehe

[alessandro]

hey, who choosed option 3 ?!!

[ross@japex]

Not me, i chose option 2! Seriously though Alex it is easy to do, give it a go any problems give me a call.

[alessandro]

Thanks!

 

I'll give it a go on Tuesday am so you might want to switch your phone off

[Chilli Red]

Thanks!

 

I'll give it a go on Tuesday am so you might want to switch your phone off

 

If we are around you are welcome to do it here and then if you get stuck one of us will help you

[bhavin85]

Im jsut down the road in northwood so if yuo want a hand drop me a pm

 

i fitted my nismo intake on my zed

[M13KYF]

their is a how to fit one on youtube

 

 

and

 

 

http://www.jimwolftechnology.com/wolfpd ... NSTALL.PDF

 

http://www.jimwolftechnology.com/wolfpd ... G-INST.PDF

[Pimm]

Go for it and take your time. The hardest bit was making a tiny hole in the plastic air scoop thingy and then screw it to the other air thingy bit if you get what I mean.