larsdowg Posted January 9, 2009 Posted January 9, 2009 Hi all, can anyone help me I have looked on the forum but can seem to find anything? Does anyone have intructions on how to fit the Genuine 350Z Tonneau cover, I have bought one 2nd hand and have no idea how to fit it......... Seems to have a lot of brakets and screws in a little bag......... I'm sure its simple when you know how and I could fit it guessing but would like to fit it with some good instructions. Anyone got any please? Cheers Quote
M13KYF Posted January 9, 2009 Posted January 9, 2009 quite simple. You'll find some fixing points under the rear strut cover. Currently have hooks in remove them and swap for the brackets to hold the big screws. Also lift the carpet and You'll find a plate running along from left to right with some holes in. Attach the other brackets to that. Quote
3FIDDYZ Posted January 9, 2009 Posted January 9, 2009 If I have the instructions at home I will try and scan them for you. Mikes Instructions are spot on anyway! Quote
larsdowg Posted January 9, 2009 Author Posted January 9, 2009 quite simple. You'll find some fixing points under the rear strut cover. Currently have hooks in remove them and swap for the brackets to hold the big screws. Also lift the carpet and You'll find a plate running along from left to right with some holes in. Attach the other brackets to that. WOW fast reply cheers much appreciated.... got any pics so I put the correct backets in the right place/right way round with the correct fittings? I seem to have 4 big plastic fittings, 4 little plugs, 4 washers, 2 screws, 2 large brackets, 2 small brackets and a bit of foam with double sided tape?? but no washing up bottle, sticky back plastic or glitter? Quote
larsdowg Posted January 9, 2009 Author Posted January 9, 2009 If I have the instructions at home I will try and scan them for you. Mikes Instructions are spot on anyway! That would be spot on thanks so I can see what I am doing....... Bit like Ikea flat pack stereo cabinet and them find your missing 1 screw Quote
Renegade Posted January 9, 2009 Posted January 9, 2009 You also need a stanley knife to make small cuts in the floor carpet,so you can fit it over the floor brackets.The little plugs go in the top holes and expand when you put the screws in. Quote
M13KYF Posted January 9, 2009 Posted January 9, 2009 yeah forgot about the couple of holes you need to put in the carpet. If you use the holes in the tonneau cover as a guide you'll see where the fixings need to go under the strut and under the carpet Quote
Rentech Posted January 9, 2009 Posted January 9, 2009 I seem to have 4 big plastic fittings, 4 little plugs, 4 washers, 2 screws, 2 large brackets, 2 small brackets and a bit of foam with double sided tape?? but no washing up bottle, sticky back plastic or glitter? Think you're in trouble, you don't have the actual tonneau cover on that list Seriously though, full parts list includes: Tonneau cover *1 Mounting bracket LO10248 *2 Mounting bracket LO10249 *2 Spacer 6-10 *2 Rawlnut M4 *2 Cross recessed screw M4x25 *2 Washer M5 *2 Cross recessed screw M6x16 *2 Washer M6 *2 Turning Knob *4 Nut M6 *4 Adhesive rubber *1 and, of course, the elusive installation manual As you can guess I have the instuctions as well, if 3FIDDYZ can't find his Quote
larsdowg Posted January 10, 2009 Author Posted January 10, 2009 I seem to have 4 big plastic fittings, 4 little plugs, 4 washers, 2 screws, 2 large brackets, 2 small brackets and a bit of foam with double sided tape?? but no washing up bottle, sticky back plastic or glitter? Think you're in trouble, you don't have the actual tonneau cover on that list Seriously though, full parts list includes: Tonneau cover *1 Mounting bracket LO10248 *2 Mounting bracket LO10249 *2 Spacer 6-10 *2 Rawlnut M4 *2 Cross recessed screw M4x25 *2 Washer M5 *2 Cross recessed screw M6x16 *2 Washer M6 *2 Turning Knob *4 Nut M6 *4 Adhesive rubber *1 and, of course, the elusive installation manual As you can guess I have the instuctions as well, if 3FIDDYZ can't find his ha ha I'm glad you have all that from instructions and not from memory If you get a chance to send them over that would be brilliant and greatly appreciated One of the fixing Bolts has a warped head, from when it was made I have replaced the pair with very similar nuts but not the original type would anyone know where I could source these? It will probably work with the ones I have sourced but the heads are a little flatter and slightly wider.... don't know until see instructions if this will cause an issue. thank again everyone Quote
larsdowg Posted January 26, 2009 Author Posted January 26, 2009 Thanks everyone for your help, I ended up fitting the cover this weekend top instructions...... can't help thinking that it was designed by someone on a Nissan YTS programme or a day release from a BTEC at the local Japanese college Anyway all sorted now and I can actually put stuff into my boot without it hitting me in the back of the head cheers everyone Quote
JoeDr3dd Posted January 27, 2009 Posted January 27, 2009 Hello Anyone still have the instructions on how to install one of these, as im stuck installing one Cheers in advance Quote
larsdowg Posted January 27, 2009 Author Posted January 27, 2009 Hello Anyone still have the instructions on how to install one of these, as im stuck installing one Cheers in advance PM sent Quote
JoeDr3dd Posted January 27, 2009 Posted January 27, 2009 Hello Anyone still have the instructions on how to install one of these, as im stuck installing one Cheers in advance PM sent many thanks Quote
spu01jaw Posted November 21, 2010 Posted November 21, 2010 Any chance of getting a copy of these instructions Quote
geoler Posted November 23, 2010 Posted November 23, 2010 RenTech has posted these very helpful instructions before: http://www.350z-uk.com/forum/viewtopic.php?f=10&t=38056 Cheers, Geo Quote
BulletMagnet Posted November 3, 2011 Posted November 3, 2011 Finally realised I was missing the rawlnuts all this time. Will pop down to local fasteners shop tomorrow. Quote
bazmcc Posted February 13, 2012 Posted February 13, 2012 How easy was it to get the rawlnuts mate? Just got a tonneau cover and, like you, need to get hold of some Quote
M13KYF Posted February 14, 2012 Posted February 14, 2012 How easy was it to get the rawlnuts mate? Just got a tonneau cover and, like you, need to get hold of some there is a very recent thread on this subject and supplier Quote
M13KYF Posted February 14, 2012 Posted February 14, 2012 their you go viewtopic.php?f=31&t=58355&hilit=tonneau&start=15 Quote
Ebized Posted February 14, 2012 Posted February 14, 2012 their you go viewtopic.php?f=31&t=58355&hilit=tonneau&start=15 Like that, directed back to his own post Quote
bazmcc Posted February 14, 2012 Posted February 14, 2012 Haha! Yeah I found a supplier just after I'd posted on this thread so i posted it on the other thread for anyone else who's looking. Forgot to come back here to say I'd found some! Cheers for the help anyway! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.