Lexx Posted October 30, 2008 Posted October 30, 2008 What a sodding day. I was driving back from Whitby about 90 mins ago, and whilst accelerating along a NSL road, I head an almishgty bang from underneath the car. A bang which I felt through the pedals. The road was quite bumpy, but not enough to cause the car to bottom out. So hazards when on, and I nursed her to the next village (luckily only a few hundred meters) and pulled up. A nasty noise intermittantly happening whenever I went over any uneven surface. I checked under the car, and made sure everything looked ok. Exhaust was hanging properly, and nothing looked bashed out of place. All wheels looked fine, and ride height looked correct all round. Decided to drive her home. So took it nice and easy. And all seemed ok. About 10 mins from home, somethign started squeeking loudly from the front. So again I stopped, and checked over the car. Lifted the bonnet and had a look, but its dark by this point so couldnt tell. Nursed the car home, sounding like sh!t when going over the speed bumps on my estate at 2 mph. Got the torch, and looked under bonnet. Found these 2 bits sitting next to the strut brace. Are these part of the suspension? Cos when looking at the top mount of the drivers side, it looks different and mishapen now compared to passenger side. (i'll take decent pics tomorrow when its light to show what I mean). Anyone any ideas??? Quote
3FIDDYZ Posted October 30, 2008 Posted October 30, 2008 Interesting.. Is the damper adjustment still visable on both sides? Little chrome knurled dial? Quote
Lexx Posted October 30, 2008 Author Posted October 30, 2008 Yup, thought the little protective cover is now missing off the drivers side one. Quote
3FIDDYZ Posted October 30, 2008 Posted October 30, 2008 Just seen the first line of the instruction manual for the Super Street.... "This product must not be fitted to cars driven on public roads".... Do they all say that? Look on page 9. Looks like the collar and rubber bush, so you may have lost some other parts from above it.... http://www.tein.co.uk/installation_manu ... /qbp24.pdf Quote
Lexx Posted October 30, 2008 Author Posted October 30, 2008 Just seen the first line of the instruction manual for the Super Street.... "This product must not be fitted to cars driven on public roads".... Do they all say that? Why call it "super street" then?? Idiots. But yeah, looks like Im missing a few washers too. I think the bush and coller from the passenger side have done a runner too. I dont even wanna think what this is gunna cost to fix. Quote
3FIDDYZ Posted October 30, 2008 Posted October 30, 2008 Hummm.... Just been checking out the manual... Says dont use a Torque wrench during installation but on the schematic the rubber mount has torque figuers... You running aftermarket antiroll bars? Reason I ask is cause of how they make the suspension act as one, if you hit a pothole on one side both shocks take the force.. Looking at the construction, If you had hit a pothole and bottomed out this may have forcer the coller through the top but I think you would have known about it.. Either that or they have just blown.. How long you had them? Not long I am guessing... Do they offer wtee? Just looked at the site and couldnt see anything... Anyone else been driving your car? Quote
Lexx Posted October 30, 2008 Author Posted October 30, 2008 Not running any other aftermarket suspension parts, not even a strut brace. They've been on since June. Not sure on warranty, I got them via Phil, so will ask him. will be asking him to have a look anyway. see if I need full new one, or whether it repairable. What a sodding day. and only I drive my car. Thanks for looking all that up for me Quote
3FIDDYZ Posted October 30, 2008 Posted October 30, 2008 There is your answer right there.... You may have done more damage.... Sorry mate.. No strut brace.... Integral part of the suspension... Were you advised not to run it or did you just take it off? Quote
Lexx Posted October 30, 2008 Author Posted October 30, 2008 Sorry, meant I dont have an aftermarket strut. The OEM one is on there. Quote
3FIDDYZ Posted October 30, 2008 Posted October 30, 2008 pheeew!!! lucky there! Am sure Phil will sort it out PITA though.... I was going to say aswell, if you had hit a pothole or dip that hard your DOTZ would have been showing the damage too I think.. Quote
3FIDDYZ Posted October 30, 2008 Posted October 30, 2008 Did you say the adjustment knub was still there??? Wonder how the coller got over it without it coming off... Quote
Lexx Posted October 30, 2008 Author Posted October 30, 2008 Did you say the adjustment knub was still there??? Wonder how the coller got over it without it coming off... Yup, its still there. Its too dark to take a decent pic at the minute without the flash ruining it so you cant see anything. Quote
Chris`I Posted October 30, 2008 Posted October 30, 2008 Did you say the adjustment knub was still there??? Wonder how the coller got over it without it coming off... +1 - very confusing. I'd ring Phil and get it back in the shop if you can Quote
bronzee Posted October 31, 2008 Posted October 31, 2008 It's probably not any different in the UK, here there's a 1 year warranty on Tein components. I'm running the full Super Street suspension system, massive improvement on stock, not had any functional issues at all, even on the shocking surfaces of some NZ roads. (Out of interest nothing mentioned here about not running the Super Street for road, in fact here it's one of the ones they recommend). What sort of setting are you running your setup at??? Let me know if you need any pics of Zeds setup looks like, if that's any help. Quote
Lexx Posted October 31, 2008 Author Posted October 31, 2008 Crisis over! Took the car to see Phil this morning. Somehow the securing bolt had worked lose, and then the bushes, coller and washes had popped out. So an hour later and its all sorted! Quote
M350ZB Posted October 31, 2008 Posted October 31, 2008 Glad its all sorted matey, and nothing to serious and costly, car looks by the way Quote
bronzee Posted November 1, 2008 Posted November 1, 2008 Good to hear it's all sorted. I normally get mine checked every few months to make sure all is ok. Quote
Chris`I Posted November 1, 2008 Posted November 1, 2008 Glad to see its sorted matey. Looking at that exploded diagram on the instructions it looks like the bits were cosmetic and not so functional that it would have caused damage to the main unit. Quote
GIXXERUK Posted November 1, 2008 Posted November 1, 2008 it could have been a much bigger problem if you had bought the kit from abroad Quote
3FIDDYZ Posted November 1, 2008 Posted November 1, 2008 Cool its sorted Off to get my spanners and check to make sure my RSR's are all ok!! Quote
neodc Posted November 12, 2008 Posted November 12, 2008 glad its sorted, could have been bad if u were doing warp speeds Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.