50mm rear arch help

[Bob94]

The rust is back and I'm not paying someone to sort it again so going to cut the rust out and get some 50mm over fenders. I need some help with what offset and width will get the wheel as flush as possible to the arches. I'm thinking of sticking with 18s. I currently have 30mm spacers that could be used with the new wheels. If anyone has any info to help that would be great. Thanks 

[ShortPaul]

Hi mate sorry to hear that, might be worth speaking to moped mark he is on this forum 

[veilside z]

Speak to Bob or Chris at Tarmac Sportz 

[docwra]

 

These were about 65mm over standard, wheel was 11J ET 10 with a 25mm spacer so effectively 11J ET -15 but no camber and normal tyres. 
See www.rimtuck.com for many, many more. 

 

[Stock]

Regarding the rust, did you have it cut out and a new piece of arch welded in, or did they just sand it back and body fill it? I know you'd need to cut out all the rust to stop it bubbling and coming back from experience.