Greddy TT Kit. Built Engine Parts & More.

[Geo92]

Good Afternoon All,

 

After some deliberation, initiated by receiving my next deployment notice(s) meaning I will essentially be out of the country until Aug 18... I am testing the water with these items.

 

It's kind of two fold; one to enable cash flow in the near future to start collating parts (*Dont tell the wife* ... LSx swap), two: to free up some space in my garage to store said parts!

 

The majority of the part are essentially new with just run in miles on them.

 

 

Pictures are all here: http://s86.photobuck...r/George_Hag92/

I will edit this post to embed pics - I did have all of this typed out with pics embedded and accidentally clicked a link and hey presto i lost it all!... -.-

 

 

 

Greddy Twin Turbo 18g TD05 Kit and Assoc. £4000

 

As standard the Greddy TT kit does not fit the uk 350z which is a great shame. With the modified downpipe, LHD started motor and the custom engine mounts this kit will clear the steering shaft.

• ​Exhaust Manifolds
  
• Greddy TD05 18g Turbos (Covered 100 miles at most)
  
• Oil feed lines and adapters
  
• 1 x Greddy pre-downpipe with W/G port delete
  
• 1 x Custom pre-downpipe with V-Band
  
• Motordyne ARTS test pipes (1 modified for v-band attachment)
  
• Custom wastegate relocation kit
  
• UpRev GT MAF
  
• LHD Starter Motor
  
• Turbo Intake piping
  
• Turbo-IC Boost Piping
  

 

 

 

 

 

 

 

 

 

 

 

 

 

Other Bits

 

• Eagle Rods, Wiesco 96mm 8.8:1 Pistons (No rings) ARP Studs - £600
  

• Cosworth Heads - £1000
  

 

• 
  
• HKS Cams - £350
  

• Cosworth Intake Manifold (Polished) - £450
  

http://www.vipmotors...Intake-Manifold

 

• Oil Pan Spacer (With oil return holes drilled and blank deletes) - £50
  

https://www.torqen.u...3503-pansp.html

 

• TB Spacer - £50
  

http://www.350z-uk.c...ir-intake-kits/

 

• ID Injectors 725cc - £450
  

https://www.torqen.u...7254814146.html

 

• AAM Stage 1 Fuel Return Kit - £450
  

https://www.torqen.u...5fs-frsbfr.html

• Exedy Twin Plate Carbon Clutch - £500
  

https://www.torqen.u...nm072sdmc1.html

 

Edited April 9, 2017 by Geo92

[evilscorp]

Dibs on the cosworth manifold.

[LDUNKZ18]

pm'd you

[WhopperSenior]

There are some real treats in here. GLWS

[Mark@Abbey m/s]

I have the Cosworth plenum if Evilscorp changes his mind.

 

Can we have a deal on the heads?

Edited April 10, 2017 by Mark@Abbey m/s

[LDUNKZ18]

Does it work on dibs??? Surely its first to pay?

[Mark@Abbey m/s]

I think we should let the 1st person that wanted the item have 1st refusal.

[LDUNKZ18]

Surely its whoever can pay first but id say thats up to the seller on how soon he needs the money.

 

3rd dibs on manifold though just to cover my ar*e.

[The Chubby Ninja]

What duration are the cams?

[Geo92]

As per a few PM's I've received, incidentally all about the Intake Manifold...

 

Please see below for some more pics.

 

Apologies If I didn't make it explicitly clear in the first post; I'm not interested in selling just one or two of the items and ending up with the majority left; I'm really aiming for the bigger items to be sold/wanted before I let the smaller ones go.

 

If they don't sell I will just have the block machined and rebuild it myself and shelf the LSx plans for another car.

 

 

Obviously the pics don't do it justice as I haven't even wiped off the dust let alone given it a quick polish.

 

 

 

 

 

 

 

[Conlonl]

whats the reccommended flywheel for that clutch?

[The Chubby Ninja]

Any info on the cams?

[Mark@Abbey m/s]

George,

 

I am interested in the whole lot including engine loom and ECU.

 

I can also do a good deal/swop for a LSX motor.

 

I am away on holiday this week , seen me a PM we can have a chat via PM or a chat when I am back later this week.

[evilscorp]

When you decide what you want to do the money is here waiting, and LDUNKZ18, YES that is how the forum works.

[Mark@Abbey m/s]

Cams are 264 specs are here

 

 

Thanks

[LDUNKZ18]

Didn't realise it worked on first dibs. I'll know in the future

[evilscorp]

no problem, otherwise you would have multiple people throwing money at someone only for them to run away with it all.... not that I believe anyone on this great site would do that.

 

I also understand the op would prefer to sell it as a job lot to save hassle... even if it is to a trader

Edited April 10, 2017 by evilscorp

[Marko123]

In the (unlikely) event that the manifold doesn't sell 4th dibs on the manifold please and 2nd on the heads (if Mark changes his mind)

[Carbon.Ninja]

1st dip on cams

 

Sent from my Nexus 6 using Tapatalk

 

 

[Geo92]

Thanks everybody for the interest and messages!

 

As it stands I am in talks with Mark @ Abby for a combined sale for everything.

 

Should this not work for whatever reason, and somebody decide to buy the turbo kit. I will honour the interest list as per who asked first for the items!

 

Any more questions please let me know.

[evilscorp]

whats the reccommended flywheel for that clutch?

Flywheel is part of the clutch, look at the toothed grey section

[Mark@Abbey m/s]

I am away in Ireland for IDC Rd1. I do need to reply to George email which I will do on Monday.

 

Thanks

[Explodedparrot]

If the throttle body spacer hasn't sold I'll put it if you'll post I'll pm you!

[Conlonl]

is the clutch still for sale?

[wizard]

Hi - have you sold everything?