Geo92

Cancel that- they’re on offer on DW ATM. Sorry!

Apologies everyone for the delayed response. The intake manifold has sold (previous thread). The TB spacer is looking likely to have sold also. I will aim to get the full turbo kit layed out and pictured within the next couple of days and some decent pictures taken for everyone. Thanks all, George

It is indeed. -George

Good Evening Everyone, Having deliberated over the future of my zed, and the current direction in which my build is going (Build thread to follow, eventually) it has become clear that I need to purchase another Zed in which I can drive day to day to keep alive the enjoyment and provide me with daily motivation in which to keep funding this ever evolving project! As I have listed these for sale before (thread below with pics), I will offer Evilscorp & Mark@Abbey first/second dibs on the cossy intake. So, to that end I have the pleasure to offer the following items for sale: 1. £450 +PnP - Polished Cosworth intake manifold 2. £50 +PnP - TB Spacer 3. £4000 +PnP - Greddy 18G twin turbo kit Pictures: 1. Cosworth intake manifold that has been polished around 18 months ago. The finish is now not perfect however it is fairly good and with some TLC i'm sure it would be back to good. 2. AAM competition throttle body spacer 3. Greddy twin turbo kit. The kit comes with all the parts listed below, however I will stress that as the front end of my car was tubed, i believe the pipework as it is will require modification for most vehicles! Included Exhaust Manifolds Greddy TD05 18G Turbos Oil Feed Lines Oil Drain Lines Upper Oil Pan with oil return bungs 1 x Greddy pre-DP with wastegate blank port 1 x Custom pre-DP (V-Band) Motordyne ARTS test pipes (1 side modified to accept V-Band) Custom wastegate relocation kit Up-Rev GT MAF LHD starter motor Custom solid engine mounts Turbo - IC Piping (Will Req modification) IC - TB piping (Will Req modification) E-Manage Blue piggyback Oil Pan spacer Issues / Not Included Steering shaft coupler will require trimming Engine mounts are solid so may not be to everybody's taste (Could be made poly) IC pipework will require modification to fit to your choice of intercooler Intercooler

Lovely example! Safe to say in comparison mines a little rough around the edges! With reference to the Zeds around Cheltenham area.. any info? - I'm posted down there with work in the next couple of months! Rushing the engine builder as we speak so I can drive her down!

As above, looking for a door/window trim for the driver side. the long black weather one. Somethint like: https://www.google.co.uk/search?q=350z+door+weather+seal&rlz=1CDGOYI_enGB725GB725&hl=en-GB&prmd=sivn&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiI26f0zvLUAhXChrQKHbq1Cv4Q_AUICigC&biw=375&bih=591#hl=en-GB&tbm=isch&q=350z+door+weather+trim&imgrc=sG4rMiIEatLSiM: cash waiting!

Car is a 05 DE Coupe. im not sure if the loom was changed for the rev up model? The main cabin loom that originates driver fuse box and terminates in 3 (maybe 4) connectors. Thanks for the quick response

Looking for an interior wiring loom for the zed. mines stripped down and seems to have developed a fault and with mapping soon due id rather an easy fix. Theres one on ebY from m&m brothers which is a joke around £150! (Apologies if he/she is on here!!) looking to spend under £50 as per what you can usually pick them up for. thanks all. george

First offer: £150 😉

As above, If anybody happens to have an LS V8 engine and box for sale please let me know. On that note, a complete drop out would be best; motor, trans, wiring, Ecu & pedal... Also would be possibly interested in other variants... LQ's etc. If anybody has anything of that nature!

Thanks everybody for the interest and messages! As it stands I am in talks with Mark @ Abby for a combined sale for everything. Should this not work for whatever reason, and somebody decide to buy the turbo kit. I will honour the interest list as per who asked first for the items! Any more questions please let me know.

As per a few PM's I've received, incidentally all about the Intake Manifold... Please see below for some more pics. Apologies If I didn't make it explicitly clear in the first post; I'm not interested in selling just one or two of the items and ending up with the majority left; I'm really aiming for the bigger items to be sold/wanted before I let the smaller ones go. If they don't sell I will just have the block machined and rebuild it myself and shelf the LSx plans for another car. Obviously the pics don't do it justice as I haven't even wiped off the dust let alone given it a quick polish.

Good Afternoon All, After some deliberation, initiated by receiving my next deployment notice(s) meaning I will essentially be out of the country until Aug 18... I am testing the water with these items. It's kind of two fold; one to enable cash flow in the near future to start collating parts (*Dont tell the wife* ... LSx swap), two: to free up some space in my garage to store said parts! The majority of the part are essentially new with just run in miles on them. Pictures are all here: http://s86.photobuck...r/George_Hag92/ I will edit this post to embed pics - I did have all of this typed out with pics embedded and accidentally clicked a link and hey presto i lost it all!... -.- Greddy Twin Turbo 18g TD05 Kit and Assoc. £4000 As standard the Greddy TT kit does not fit the uk 350z which is a great shame. With the modified downpipe, LHD started motor and the custom engine mounts this kit will clear the steering shaft. ​Exhaust Manifolds Greddy TD05 18g Turbos (Covered 100 miles at most) Oil feed lines and adapters 1 x Greddy pre-downpipe with W/G port delete 1 x Custom pre-downpipe with V-Band Motordyne ARTS test pipes (1 modified for v-band attachment) Custom wastegate relocation kit UpRev GT MAF LHD Starter Motor Turbo Intake piping Turbo-IC Boost Piping Other Bits Eagle Rods, Wiesco 96mm 8.8:1 Pistons (No rings) ARP Studs - £600 Cosworth Heads - £1000 HKS Cams - £350 Cosworth Intake Manifold (Polished) - £450 http://www.vipmotors...Intake-Manifold Oil Pan Spacer (With oil return holes drilled and blank deletes) - £50 https://www.torqen.u...3503-pansp.html TB Spacer - £50 http://www.350z-uk.c...ir-intake-kits/ ID Injectors 725cc - £450 https://www.torqen.u...7254814146.html AAM Stage 1 Fuel Return Kit - £450 https://www.torqen.u...5fs-frsbfr.html Exedy Twin Plate Carbon Clutch - £500 https://www.torqen.u...nm072sdmc1.html