InsanezeD Posted August 4, 2015 Share Posted August 4, 2015 Ok so how do you chaps keep your front poly lips black? I started using back to black stuff but it doesn't last that long so I've been using tyre dresser and that lasts longer but eventually starts to grey. Just curious if anyone has addressed this and found a decent product or solution? Quote Link to comment Share on other sites More sharing options...
Mudman Posted August 4, 2015 Share Posted August 4, 2015 Tried trim glitz ? Quote Link to comment Share on other sites More sharing options...
veilside z Posted August 5, 2015 Share Posted August 5, 2015 I use Autoglym bumper and trim gel. Quote Link to comment Share on other sites More sharing options...
InsanezeD Posted August 5, 2015 Author Share Posted August 5, 2015 Cheers guys. Do these products yield lasting results and how often would you say you need to re apply these, if at all? Quote Link to comment Share on other sites More sharing options...
coldel Posted August 5, 2015 Share Posted August 5, 2015 Cherry Blossom boot polish Quote Link to comment Share on other sites More sharing options...
14N Posted August 5, 2015 Share Posted August 5, 2015 (edited) Paint it gloss black. The PU looks unfinished if fitted fresh from the box IMHO. Edited August 5, 2015 by 14N 1 Quote Link to comment Share on other sites More sharing options...
35oz's Posted August 5, 2015 Share Posted August 5, 2015 If painting it black would a special primer be needed? As I was thinking of painting mine Quote Link to comment Share on other sites More sharing options...
14N Posted August 5, 2015 Share Posted August 5, 2015 I've literally just (last week) painted my PU lip. I used a plastic primer (rattle can) from Halfords. They do also do a plastic filler primer which would be better, as it helps cover the imperfections in the PU. Quote Link to comment Share on other sites More sharing options...
ilogikal1 Posted August 5, 2015 Share Posted August 5, 2015 If you're keeping it unpainted, you'll be best off with a coating - Gyeon Trim, Nanolex Trim Rejuvinator or GTechniq C1/4/5 to name a few of the better ones I have tried myself. If you get the preparation right, they should last in the region of a year at a time (if not more). Preparation for best results requires the surface to be perfectly clean - that means more than just a wipe over with a soapy sponge by the way - free of oils and completely dry. On the other hand if with the likes of a tyre dressing, you can expect to re-apply monthly if not more often to be honest. There are better trim dressings than those aimed at tyres though - I'm personally not a fan of AG products in general, whilst they're not necessarily bad, they're not usually much good either and sit firmly in the average category for the most part - and products like Auto Finesse Revive or Dr Beasley's Plastic Sealant would be my preferred choice. If you are painting it though, that changes everything. 1 Quote Link to comment Share on other sites More sharing options...
Dicky Posted August 5, 2015 Share Posted August 5, 2015 Cherry Blossom boot polish +1 Quote Link to comment Share on other sites More sharing options...
veilside z Posted August 5, 2015 Share Posted August 5, 2015 Around every 3/4 weeks. Quote Link to comment Share on other sites More sharing options...
InsanezeD Posted August 5, 2015 Author Share Posted August 5, 2015 Thanks for all the reply's chaps and thanks ilogikal1 for that informative reply - much appreciated fellar! Quote Link to comment Share on other sites More sharing options...
Ridz Posted August 7, 2015 Share Posted August 7, 2015 +1 for ilogikal1's comments. I have had good results with Gtechiq C4 on the Zed front lip, which has lasted 18 months and only now is showing signs of requiring reapplication. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.