ZMANALEX

Hi and to the forum. All parts in stock. PM on its way Alex.

Bummer, going to miss it as well this year, was so looking forward to it, however committed to the BTTC at Knockhill that weekend.

As you know I have a few front bumpers in stock But only the orange reflectors. Alex.

Nice one Jay Alan, Genuine Nissan Brembo new and low mileage preowned rear rotors in stock. Drop me a pm if I can help you further mate Alex.

If you find one then I will happily buy your old one off you Alex.

30mm is about the max you should drop. Check these out viewtopic.php?f=157&t=42416 In stock and good to go Alex.

If your Zed is the model with the slave cyl. on the outside of the gearbox, and not the internal concentric slave, then I would recommend the following. Replace the rubber hydraulic hose with a braided one and swop out the slave cyl. Flush out the old fluid which will now be boiled and bleed as required adding new fluids. Slaves, lines and fluids all in stock and good to go same next day. Alex.

Booked up today for the July Track Events at Knockhill Friday 8th July 6pm - 8pm Wednesday 13th July 6pm - 8pm Thursday 21st July NOW 6pm - 8pm Thursday 28th July 6pm - 8pm Places still available, so c'mon guys and girls, get signed up. viewtopic.php?f=36&t=46095 Free entry for spectators with pax laps taboot. Alex

I have new ones

Hi and to the forum. I have a Roadster and the roof is never up. You wont be disappointed

Hi and to the forum

You wont have to do this Tony as the ones that you have bought are totally plug and play

Battery disconnection not required mate

I think that the set without may be for an HR. Check out the triangle flange to see if the flanges are different.

All sorted

Hi and to the forum

Hi mate, The price is in the link that I sent you. Exedy clutch kits, OEM Dual mass flys and Single mass aluminium lightened flys are all in stock good to go same next day. PM on its way. Alex.

Hi and to the forum

Phil, If your clutch is slipping whether intermittent or not then time for a new clutch I am afraid. Can be found here, in stock and good to go viewtopic.php?f=157&t=27436 Alex.

Nice one Max Here you go Beggers, in stock and good to go viewtopic.php?f=157&t=48509 Alex.

New and preowned in stock and as you already know I have the yolk for the prop shaft as well. However they are not for free mate and you will have to pay the going rate + shipping. If you are not prepared to do that then please do not waste yours or my time. Alex.

My view is that if the heat treatment is carried out correctly during the refurb and powdercoating process then it is highly unlikely that you will experience a wheel failure. I have provided this service for a number of years now and have probably turned out circa 120 sets of wheels and not had one failure. I have also done around a dozen sets of GT4 rims with no issues. My own 6 sets of rays that I run on my track car have also been powdercoated and again to date, no issues. So to summarise, I believe that if the PC process is done correctly then all will be good. Alex

Yes.

In stock and good to go viewtopic.php?f=157&t=42415 Alex.

I have both JDM and UK intakes in stock What do you require? Alex.