FRONT WIPER AND WASHER SYSTEM PFP:28810
Components Parts and Harness Connector Location AKS000Y6
System Description AKS000Y7
All front wiper relays (HI, LO) are included in IPDM E/R.
Wiper switch (combination switch) is composed of a combination of 5 output terminals and 5 input terminals.
Terminal combination status is read by BCM when switch is turned ON.
BCM controls front wiper LO, HI, and INT (intermittent) operation.
IPDM E/R operates wiper motor according to CAN communication signals from BCM.
Power is supplied at all times
through 40 A fusible link (letter F, located in fusible link box.)
to BCM terminal 7,
through 20 A fuse [No.74 located in IPDM E/R (intelligent power distribution module engine room)]
to front wiper relay [built in IPDM E/R (intelligent power distribution module engine room)]
through 15 A fuse [No.73 located in IPDM E/R (intelligent power distribution module engine room)]
to IPDM E/R (CPU).
When the ignition switch ON or START position, power is supplied
through 10 A fuse [No.1 located in fuse block (J/B]
to BCM terminal 35 and.
through 10 A fuse [No.80, located in IPDM E/R (intelligent power distribution module engine room)]
to front wiper relay [built in IPDM E/R (intelligent power distribution module engine room)] and
to front wiper high relay [built in IPDM E/R (intelligent power distribution module engine room)] and
through 10 A fuse [No.87 located in IPDM E/R (intelligent power distribution module engine room)]
through IPDM E/R terminal 18
to front washer motor terminal 2.
Ground is supplied
SKIA3235E