Strudul

Surely along the same lines as the 3M stuff? Can anyone really guarantee that if the wind gets under it at 130mph it won't pull it off?

Wiper delete done, boot weight removed while I had the trim off, some SSS project testing, and forum sticker on and looking tasty (thanks again Stu) Cracked out the Robot Wars ruler

Ah, righto. Looking through the Screwfix catalogue, Sikaflex comes under sealant rather than adhesives. Would something like this Evo-Stik be better or too strong and impossible to get off?

You do mean 291i, right? Can't find 29 anywhere... Just thinking about removal, how would you attack it with a solvent if it's behind something (green)? Can you just do a strip along the edge instead (red)? (blue = glass, grey = aly, red/green = sealant)

Custom Try running a rubber / foam strip along the edge of the slats where they touch the glass?

Would you recommend Sikaflex 291i over all the others (221, 512, EBT)? EBT seems to be the only one stocked in stores. What about CT1 instead? Also would it still be effective when spread thinly?

By the way, comprehensive is cheaper than TP / TPFT 90% of the time (which is stupid, but true).

Good shout, though after some serious brainstorming I think toffee would be a better solution, as when it comes to removing it, toffee tastes better than lard when being licked off.

I assume it won't damage glass / aluminium, but won't be very kind to paint?

How removeable are those if the need should ever arise?

Edited- Looking to mount aluminium (probably painted, but I can leave it raw on the connecting side if that helps) sheet to glass (rear window). Requirements: - Strong enough to never fall off - Removable (doesn't have to be easy, just possible, and without leaving any marks) - No damage to the glass or the aluminium (or the paint on the aluminium) - Low profile Was going to use 3M tape, but have been persuaded otherwise, and an adhesive sealant is sounding like a better option unless someone has any other ideas. Old Post: Any suggestions or advice appreciated. Cheers

Yeah, was on about before all the all the emos, skater boys, and scene kids started wearing girls clothes... SMDH...

Whatever works for the majority.

Bump. C'mon guys, don't let the team down

Super secret special project is starting to take off. It's taken a day to get my head round it, but (I think) I've finally cracked it...

Skating, BMW and rock music were all baggy jeans until the skinny jean trend came around... Wait, beemer owners have a dress code? I'm trying to type with 1 hand while eating, leave me alone. That being said, yes there is, and here's a little look into Sausage's life:

Oh, that's a Rev Up DE btw, you can tell just by the bonnet** (HR has a bulge instead of those 2 lines). Year it a bad way to tell, as I'm in the same boat with a non-HR 07. **Some people swap the HR bonnet onto a DE, so having the bulge doesn't necessarily mean you have an HR, but you can't retro fit it (DE bonnet won't fit on an HR), so if it has the DE bonnet, you know it's a DE.

Nuuu, use imgur. along though

Skating, BMW and rock music were all baggy jeans until the skinny jean trend came around...

Calves are the only place I ever get DOMS. Literally can't straighten my legs for 3 days without spending 20 mins trying to stretch them out.

It's Dubai isn't it?

Or Tony Hawk...

Those purple lights look sweet. Can't help but see it as a spotlight for thieves though