Was quoted £3150 for airlift manual including fitting, only want basic kit so might go for it, was hoping a could get something second hand.
Sent from my iPhone using Tapatalk
I'm upgrading my brembo brakes to braided lines and some new pads what would you recommend for fast road use ? I don't want them to be poor when cold either.
Sent from my iPhone using Tapatalk
And here's the finished product I think it's a big improvement a lot cleaner and a nice finishing touch. I'm happy with the engine bay now.
Sent from my iPhone using Tapatalk
I put some spare tubing I had on the pipes and some bolts in the holes to make sure I didn't spray paint all the threads.
Sent from my iPhone using Tapatalk
Now that it was sanded down and degreased it was dried and now ready for paint I decided on this spray paint because it was suitable for exhausts and engine blocks and temperatures up to 800*c and even oil and petrol resistant, four coats later and it was finished.
Sent from my iPhone using Tapatalk
Incase your wondering what the little stains are around the plenum nuts I sprayed a little wd40 before I removed as they seemed a little corroded. (Before I put the aftermarket ones in) sanding then began followed by degreasing so just general prep before paint.
Sent from my iPhone using Tapatalk
Decided to be a little different from the polished plenum and decided to paint mine. Started off removing and sanding with 80 grit and 120 sand paper. I found that the hose clips can be very akward and ended up cutting my hands to bits.
Sent from my iPhone using Tapatalk