GARGOYLE

I got mine from a local motor factors .

I have used tigerseal to put a front bumper section of a body kit on after some painting was done no screws needed it is strong stuff tigerseal.

I'll take a set for a de. Thanks

New knob and gaiter for gear stick.

Today I took my zed to get gearbox and diff oil replaced, I asked them to use nissan products and some additives, what a difference it makes to the gear change and the diff is quieter. The car only has 46000mls on a 55 plate so I would guess that it might not have been done before. I would recommend to any new owners to do this as the difference from before to after is amazing.

Did you fit spigot rings? I had to put them on my jr3's I got from Tarmac.

Moffat classic car rally is a 2 day show on Saturday they all go driving around the local area and on Sundays it's 300 car's, old vintage car's and modern car's also some old bikes and a few club's a good day out for petrolheads.

If horse's can ride on my road without road tax with their metal shoes and crap all over the place without cleaning it up I should be allowed to use their field for doing donuts!. I don't care if I **** off the horse crowd!.

Hi StevoD the wheels are 9.5x19 and 10.5x19 I'm happy with the aggressive look it gives the car over standard wheels.

I rang my insurance company and declared my new wheels and the price £0.

Thanks I'll give it a try.

Hi folks, I've got new wheels on but would like to know what tyre pressure I should run. Standard 18's: 35psi, my new set 19's 245/35-275/35. What should I have?

Hi people, I have fitted the wheels and noticed that you need a set of spacers on the front to clear the brembo's I fitted 3mm and they clear the calipers by 1mm. Now I need to save some money to lower the car, think I'll go clean it now. Hope this helps.

Hi people remember to order spigot rings size:74.1-66.1 and also tuner nuts size: taper 60degs m12 1.25 as standard nuts will be to big so you can't get the wheel brace in the nut holes. I have seen the tuner nuts that have a key nut that slots inside the tuner nut for all 20 of the tuner nuts I think they would be the best idea.

Sorted now CS pointed me in the right direction.

Not sure I don't have any scales they feel light enough.

Hello 2 weeks ago I ordered jr3 19x9.5x2 and 19x10.5x2 they where shipped Tuesday and received Wednesday about lunchtime here is some pictures for you to see what a staggered set looks like I am getting tyre's fitted tomorrow.

Can any traders on here help me get a set of spigot rings? Size outside diameter:74.1 Size inside diameter:66.1 Any help would be great

I have a creaking noise and I think it is the parcel shelf as it moves it rub's and creaks. Sent from my SM-T210 using Tapatalk

Is there any issues with arch rubbing on 19x10.5? Or do I have to roll the arch. Car not lowered yet. Sent from my SM-T210 using Tapatalk

I will take a kit thank you. Sent from my SM-T210 using Tapatalk

I see you are running 35 profile tyres on 18's but on the standard 18's the profile is 45. The question is how much it affects your MPH? Or is there next to no difference in MPH? Sent from my SM-T210 using Tapatalk

Like the wheels where did you get them? Sent from my SM-T210 using Tapatalk

I had a bmw530ise e60 before I bought my 05 350z and I'm happy with the build quality. Sent from my SM-T210 using Tapatalk

I used audi metallic black. In a spray gun powered by a compressor.btw the door sill's were standard black plastic. Sent from my SM-T210 using Tapatalk