Smc1992

Well I couldnt feel any play in the wheel bearings and the brake shield doesnt appear to be catching. Tyre weights are all there but I think I need to have the wheels re-balanced to try and elimate the wheel shaking at higher speeds, the wheel shaking is probably down to a worn bush though isnt it? I think the route I need to take is start by replacing bushes until the problem goes

Thats good to know then! Thanks evilscorp. I need to have another look to try and work out what it could be

I like it, genuinely didnt cross my mind how many ways bush can be interpreted until now

Haha what was you expecting?

Hi guys When I am driving there is a noise which seems to occur with every half revolution of the wheel, like there is a screw or something in the tyre. So I checked the tyres and noticed my rears were bald and fronts barely legal so I decided to buy a full set. The noise is now more noticeable (I think). I dont know if my mind is playing tricks with me now but I also think I can feel/hear this noise more when driving at say 30 / 40mph whilst on a sweeping left. There is also a bit of wheel wobble when I am at around 60/70mph. I took all the wheels off to check the wheel bearings and I could feel no play/wobble in any of them so I had a look at all the bushes I could see, I noticed something that I thought was strange but I am not 100% sure so I thought I would show it to some of you guys. I dont know what this arm is called but there are bushes at either side. on one side you can see the bush protruding through both sides of the sleeve as below (not a clear photo so you might not be able to see) But on the other side of the arm you can see the bush at one side but at the other it doesnt look like anything is there, like the bush isnt seated correctly? It is exactly the same on the other side but I have no idea whether that is meant to be like that! I intend to polybush every bush but would just like to know where this noise is coming from because it is driving me mad. All I can tell is that it is from the front of the car, sometimes I convince myself its from the drivers side and other times I convince myself its passenger side. Any help would be much appreciated

This isnt too far from me, my mum rang me up earlier to check it wasnt me! Not many sunset zeds around so she put 2 + 2 together! I agree with Bockaaarck, no matter what the facts of this crash are it is a tragic accident and I feel really sorry for the family and friends involved

My mate linked me to this in the news. http://www.dailymail.co.uk/news/article-3250871/Two-men-arrested-three-killed-early-hours-quad-bike-crash-sports-car.html Even my mum rang me because she saw this and started worrying about me, its not too far from me and I cant say i've seen another sunset zed around here so she put 2 + 2 together! Looks a mess and its a tragic outcome even if they were driving too fast :/

Argghh, ive had my eyes on this for a little while now I just dont have the funds just yet

At least we have a few forum members going!

I posted a thread to see if anyone was interested. http://www.350z-uk.com/topic/101765-japshow-finale/ There doesnt seem to be much interest though

I went http://www.350z-uk.com/topic/93938-jae-2015/ If you go onto the last page of that thread youll find some photos. I took loads but havn't got round to uploading them all yet

I thought thats what you would have meant haha. I think i'll be going down on the Sunday

I've already noticed the work Mark does in the member traders section and when i'm ready i'll definately be putting in my requests for bonnet catch, plenum and throttle body! That is a nice bay, it goes well with the colour of the car and doesnt look too much

Nice one ZeppoJeff, i'll give you a PM if I start feeling purple ðŸ‘

October 10th/11th I saw the team tarmac zeds at JAE! I'd also be up for a club stand with the 350z forum if there are enough people who want to go?

I think I like the purple, I feel the orange on orange might be too much for my taste, maybe if I saw it in the flesh I would think differently. I did think about going black but then there is no contrast and I would like it to stand out a bit, I just dont want it to look silly. Thanks for the input guys, i'll keep looking around to see if I can figure out what I fancy.

I am just after some opinions/ideas on what colour hoses etc. to get for my engine bay that will match the colour of the car, I have had a look around the forum but I think I need to be told what will actually go with my car because I have become really indecisive Car is currently Sunset Orange and I have been thinking about, polished plenum, bonnet catch, throttle body and strut bar (maybe powder coated instead), then I was thinking about going with orange hoses but I think this may be too much, so what do you guys think about purple hoses? I am open to ideas I just can't see the common colours such as blue or red going with the orange Thanks for any input! Scott

Hi guys I have just come across an event called the Japshow finale which is held at Santa Pod. Quite a few japanese car clubs seem to have themselves a stand sorted out was just wondering whether anyone was going down in there Z? http://www.japshowfinale.co.uk/index.html I'm new to the car events/shows scene so I don't know much about them, maybe someone here has been before but it looks alright to me. Anyone going? Scott

Bit of a late reply to this thread but I just want to mimic what has been said above! Great weekend, thanks for inviting us and organising it all Gaz, met some great people and was a brilliant atmosphere, hopefully there will be more events like this in the future!

So there is me and one guy with a 300zx here, no idea where to park lol

Do i need to print off the tickets or could i show the email attachment on my phone?

I have had my zed nearly two months now and I have noticed things on my car which make me think a previous owner has had a case of zeditus, possibly a previous forum member? I think the car had been lowered, my wheel alignment is currently out, I can tell due to the heavy wear on inside edge of wheels (ordered 4 new tyres which should be due tomorrow then i'll have 4 wheel alignment done) and there are a few scrapes underneath. The Z also has decat pipes + full stainless, cone type air filter and it has funky orange washers around some of the bolts in the engine bay, I reckon it used to have more but probably had some modifications removed before selling. Some pictures of the car here http://www.350z-uk.c...20#entry1514609 Just curious to see if anyone on here previously owned her!

Jumzo, my rear exhaust hangers look similar to the ones in that link, thats probably why my back box isn't sitting right? I'm sure they looked like that anyway. Nissan didnt have them in stock there and then, they said they will order them in for today, so I might bite the bullet and just buy them, at least I know they will be the right ones and I dont have to wait around for them to be delivered.

My back box seems to be sitting wonky so I thought I would replace the 2 rubber mounts that hold up the back box to see if it sorts it out. So I went down to my local Nissan to see about a price for them and they said £32!! For two rubber hangers! I couldnt believe it, I know zed parts are not the cheapest but I thought that was a lot for what they are. I found some here http://www.onlineautomotive.co.uk/Products.aspx?ID=MgAxADQANwAyADYANgA2ADQAdwBYAEwAbABJACcAWABcAE4AIwAhAFgANwA%3d So going to try these and replace the old tatty ones, just thought i'd share my experience

Just ordered the tickets! Cant wait!