iLott

Yeah come on Grundy!

PRICE DROP £1300

I bought some of this but im not convinced. A lot of people on the American 350z sites say that Honda Inca Pearl is a nigh on perfect match. Paint code: Y-61P

Bump

PRICE DROP £1350

Bottom Left 100%, I would do it to mine if it wasn't going to leave any holes

I will be more than happy to split them both if I can get someone to agree at the same time and for the right prices.

XXR do a nice Black with chrome dish option. Can't remember what they're called though, and they're cheap!

I've removed the indicator unit several times without removing the bumper. I just took out the tail light, then undid a couple of fastening bolts/clips at the top of the bumper and then you can get your hand down inside and take out the screws holding it in. Little bit awkward but definitely doable. Edit: I did up to picture number 5 on that guide and then 8a included and you can pull it away slightly, enough to get your tools in.

I prefer the 'deep bellow' but you're just not going to get it from the zed's v6! Your best bet is probably the Milltek.

Come one some one grab yourself this decent bit of kit!

Bumpedy

Because it's not air ride, it's a cheaper alternative simply for navigating obstacles like speed humps. The company I got them from are working on a rear set though.

Price drop! £1400

This is 245/40/18 on a 9.75j rim on the front.

Opening poster?

Bump

Indeed it is mate, exactly right. Or a slopey drive way!

I've put it up at a little loss to try and get rid! Really need the money rather than the goods or they'd be straight on the car!

So a change in circumstances has forced me to sell my suspensions set up. It's 99% complete kit with the only things missing being two solenoid valves which I never got round to buying and some paddle switches/ electronic switches and relays, these can be picked up on eBay fairly cheap. Parts list - - Brand new 'extra low' BC racing coilovers, these are made to my spec so have an extra 20mm lowering on the front and come with rubber isolators to eliminate the rear adjusters if need be. Also comes with 2 c spanners for adjustment, the adjustment lengtheners for the rear shocks and all appropriate paper work/ stickers. - Refurbished Stance solutions, static+ kit. These are air cups that sit on the top of the coilover (seen on the pics) and allow 2 inches of lift when you need it! See www.stance-solutions.com for more information. There are also a few vids on YouTube. - Brand new Viair 380C compressor. This is a 100% duty cycle compressor, which means it can run constantly for an hour without breaking (not that it will be on for anywhere near that!) see the viair website for stats on fill times etc. comes with spare filter element and appropriate fittings for remote fitting of the inlet filter. - Brand new Satin black, steel 5 gallon air tank rated to 150 psi. It has 8 1/2 inch NPT ports, four on the front, one on each end and one on top and bottom. - An abundance of fittings, all new: 10 x 12.5mm O-Rings, for static+ kit air seals 4 x 1/4" male to 1/8" female reducing bushes 2 x 1/2" male to 1/4" female reducing bushes 1 x 1/2" male to 1/8" female reducing bush 5 x 1/2" blanks 8 x male 1/8" push fit connectors 1 x female 1/8" push for connector 2 x 1/4" bulk head T with 1/8" push for connections 1 x manual pressure inlet valve with 1/8" push for connector 1 x 90/120 PSI pressure switch 1 x 1/4" adjustable (not currently set) pressure release valve 1 x 1/8" flow control valve 1 x 1/8" push fit T connector 1 x 1/8" push fit X connector 1 x 1/8" drain **** 1 x 100 psi gauge 1 x roll of PTFE thread seal tape 1 x bottle of GT85 Lubricant for keeping the air cups lubed 6m of 6mm air line Just to prove it's my stuff! Now down to price! I'm going to set the price at £1450 for the full kit but I am willing to split it if I get interest in the coilovers and static+ kit separately. Collection only, located in Newbury, Berkshire. You may organise your own courier if need be. Thanks Dan

I tend to agree with the others on the V2 front, or even a subtle spoiler like the Blitz style one. However it is your car so get one that YOU like not that others do.

There was no Donald in this thread

I've been rumbled!

Nah it's a roadster!

So here is my new zed! The only mods it has are H&R lowering springs and 20 inch wheels My only criticism is that it's a bit cramped Dan