Vlad

Sorry guys, all sold!

Anyone on here? Beast was parked right next to the reception.

As per title, here I have for sale carbon fibre slam panel and carbon fibre battery and fluids covers. All in good used condition with few marks (see pictures). I used silicone to hold covers in place and they were fine (still a bit of silicone left on the inside) Close up pics with marks. All marks/scratches, as far as i can see, are on the lacquer, so may be could be polished out? Battery cover. Fluids cover Slam panel. Few marks around where plastics pins go to hold it down (pretty invisible ones them pics are in) and couple of light cracks (whole thing is still in one piece. Cracks are, looks like, just in the lacquer - as there no cracks on other side of the panel. Here are identical items: Carbon covers @ £119 http://carbonfinish....-battery-cover/ Carbon slam panel @ £119 http://www.jdmgarage...slam-panel.html Prices: Battery Fluids Covers £70 and Slam Panel £70. Or both for £130 delivered. Collection is welcome from Leamington Spa, CV32 P.S. I'm flying away on a holiday this Saturday for 2 weeks. So latest I can post this is Sat.... otherwise will have to wait till I come back.

I think it was around £30 for 2 bottles...and u only need 1 bottle to re-fill it

I got some from Tarmac recently

Hahahah I thought that

Watched it today... Great film! And definately had a tear in my eye at the end... Very sad

Yea, that's the ones. I bought Nismo centre caps tho lol

I had similar ones (without polished lip) for 3 years and they were fine. Sold them recently, and now new owner enjoying them! Mine were 8.5" and 9.5" with 20mm spacers on the front and 25mm spacers in the back

"damaged, repaired, converted to GTR" simple as!

I run 10" on front with 265 tyre - so far so good

Don't think you can get 10mm spacers with "built-in" studs...as i think 10mm is not thick enough to hold a stud in securely, if that makes sense? I think minimum yu can go is 15mm with built in stud... otherwise you will need replace your standard studs for a longer ones to use with 10mm spacer

I'm in warwick too. I have a black Nismo though. I make the trip to Leicester for any mechanical work. Cougar store. Sent from my iPhone using Tapatalk Didn't realise you live in warwick now mate? Need to come out one night for a little drive and Z chat

Isn't that standard JDM bumper? With possibly added lip at the bottom

Woohhoooo! That re-assured me! Still ordered 6mm spacers - just for that 1mm extra lol

I used to say that i still say that and it works

I used to say that i still say that and it works

It must have expired? Didn't they teach you about the subject matter? Yes I know you captured the specific issue but at least get the wheel in the photo properly. It is properly in...not fully in, but in

P.s. Thanks all for the advice and help on this problem

Learning from the best

:lol: I got degree in photography... What's wrong? I think zoom and contrast are pretty perfect !

Picture is in 1st post...

Yea I think that what I will go for

As I said in my 1st post - looks like there are few mm difference on different Zeds...as same wheels fitted fine on other Zed with Brembos. So not really their fault...and I had wheels for 2months before I fitted them (and fitted tyres before I trial fitted them)

Cheers for that! Just found a guide on US forum and they use ball joint remover tool instead of hammering then out. Will go for 6mm spacers for now - if I still worried, will change to 10mm with longer studs. Unless someone will say that I definately need 10mm spacers now lol