andylb

http://www.ebay.co.uk/itm/231155411055?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 (I know this isn't Z specific but there's a minimum post limit on the GTR forum and I thought some of you might be interested!) I got this when I bought my Z, as the guy had pre-ordered a GTR at the time. Nissan gave out these GTR branded tape measures for customers to measure their heads (!) for helmet fitting for the GTR track experiences.

Selling some tyres I had left from Z ownership: http://www.ebay.co.uk/itm/231144782750?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Fronts http://www.ebay.co.uk/itm/231144783181?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Rears

And in terms of price how does the HR kit compare to the DE kit?

Check out dealextreme.com . If you search for bulb type rather than car name you can get these ultra cheap, it's where most of the ebay sellers buy from anyway. Only downside is you have to wait a while for postage. Ive seen the interior led kits go on ebay for 4 times what they are on dealextreme.

+1 for the 452s. get yourself over to Camskill and then get them fitted locally.

I've always wondered how headlights get like that? Long term abrasion of 100mph flies/stonechips? I can understand clouding from the inside but not on the outiside

Josh, I'm guessing you know the left speaker problem is the "ribbon re-insertion" fix? I took mine to cookbot but I think he's off the radar now. It's not too bad a job for someone handy with a soldering iron.

Lazy question which could probably be answered with a search, but - what's the rough cost of this?

likewise I already have a set of canards...i just want carbon ones if i cant get carbon ones, I'll give you a shout RT! I think I'm just missing the humour!

Just fitted 225/40/18 Falken 452s on the front. No T/C issues whatsoever, car feels a lot more firm on turn in as well.

It's a good point, but then won't I need an amp as well, and then a new head unit to connect it to? I actually dont think the sub is that bad when it is working, provides a bit of bass, I don't need loads.

I have the bose system, and have the issue with the sub cutting out. Had cookie do the ribbon reinsertion mod a while back to fix the left hand side cutting out, so I don't think it's this. I tried the fix of opening up the box and wedging some paper in, but it didn't fix it. Anyone know of a possible fix to this? Is there anyone around the south east way that can offer a fix for it?

I'll sell you these viewtopic.php?f=32&t=62616 for £40 and you can get them dipped

Just realised it isn't 2 degrees out, only half a degree. It's two degrees total Neil, would be great if you had one for me. Will pm

Powder coated or painted? If painted, what colour code?

Cheers for the advice

I'm 2 degrees out on rear nearside, (not lowered), but the local garage says that when trying to adjust the camber, the bolt just springs straight back. How much is the OE Camber adjustment bolt? Or is does this require a bush replacement? Any tips anyone?

Hi, I used garden wire to slice through the glue, then a cloth and surgical spirit to remove the glue. You might want to take off the interior panels to check that there are no holes first. Andy

Can I be the first to say: "It'll come out with a bit of T-Cut that"

Spotted.... After I listed it! £110 http://www.ebay.co.uk/itm/230727757235

7500 tops from me

I wonder what the legality of those rear seats are? I wonder if there are any issues with just adding extra seats to a car yourself.

I'm still a yes, have PM's you about this again cookie.

I got a cheapy like this for doing suspension top mounts and other non-captive nuts it's occasionally useful!

Seems a fair price to me, exact same colour and spec as mine (although mine has 45k less on the clock) for 500 less than I paid.