SamN

This is a reluctant sale as I love this car and have been putting it off for ages, I just simply don't use it so it makes more sense to sell it. I’m in no rush to sell so no stupid offers please. I'm after £6200. It’s a 2004 UK GT model, which includes all the good bits such as Brembo brakes, LSD, heated leather seats, BOSE sound system, short shifter, sat nav etc. It has approx 108k miles with full service history and MOT until 16/11/2016. Exterior Custom wide body sprayed Ford Frozen White Smoothed boot and aerial Rear window spoiler Import rear bumper Front aero splitter Tarmac side steps Front wheels: XXR 527 9.75J ET20 with Yokohama 225/40/18 tyres and 30mm spacers Rear wheels: XXR 527 9.75J ET20 with Budget 225/40/18 tyres and 50mm spacers Side windows tinted Suspension HSD Dual Tech coilovers Driftworks front and rear adjustable camber arms Engine Plenum spacer GT strut brace K&N induction kit Jasma stainless exhaust (with decats) Paddle clutch Lightweight flywheel New battery Interior Heated leather seats (driver seat not fitted but included) Sat nav Driftworks Cobra Suzuka bucket seat on Driftworks rail Sparco deep dish steering wheel with NRG boss (hopefully I'll replace these prior to sale as I'd like to keep the wheel and the boss is borrowed) Hydraulic handbrake with HEL braided lines Problems - every car has them, just being honest as possible. This is a project car so needs some TLC. Intermittent stereo cut out (common problem, simple fix: replace head unit) Exhaust slightly blowing (gaskets should solve this) Alignment needs doing (I should be able to get this done) Oil pressure gauge stopped working (not sure why as it was fine until I left the centre console unplugged for a while.. Must be a sensor or something as it's running fine) Heated seat not currently working (probably just disconnected, haven’t even looked at this as I have the driver bucket seat in) Hydraulic handbrake install needs completing (centre console doesn't fit over it at the moment) Slight knocking coming from the NSF lower control arm (common fault with the bush/ball joint) Gearbox/clutch release bearing are a little on the noisy side (due to lightweight flywheel) No spare wheel so boot carpet cannot be fitted (though I do have it, it just sits on top of the spare wheel) Paint flaking in places / slight over spray on windows (will probably scrape off) ideally needs a good machine polish and lacquer Notes for MOT: car has decat pipes fitted, and airbag light on due to dish steering wheel. EML may also be on due to decats, can't remember as I haven't driven it for a week or so. I realise I don't have many pictures on my phone either! I'll have to take some more.... Here are a couple of how it stands: Here are a few pictures of the build: I'm not on here as often as I'd like at the moment so best to be contacted on O77O6 49OO93. Thanks, Sam

Hi guys, I unplugged my gauges from the centre console in my 04 plate 350Z and drove the car 100 miles or so before re-fitting, now the oil pressure gauge goes off the chart as soon as I start the car and stays there. Nothing else has changed so it's unlikely to be the sensor in my opinion. I've unplugged the gauges and plugged them back in, the others are working fine and they use the same plug! Any ideas? Thanks Sam

Thanks, managed to sort it tonight without snapping a bolt Sent from my SM-G900F using Tapatalk

Hi all, I'm in the process of fitting adjustable camber arms and one of the bolts is stuck in the bush. I'm going to attempt to remove it again tonight but if it snaps, I'll need to replace it asap. Does anyone local have one? I don't really want to have to buy the Eibach bolts as I won't need the extra adjustment being that I have adjustable arms. Thanks Sam

PM'd Sent from my SM-G900F using Tapatalk

Still got this? Sent from my SM-G900F using Tapatalk

As per title, does anyone have any for sale? Not looking to buy new.

Bump Sent from my SM-G900F using Tapatalk

Did some googling and Dex III it is, thanks guys. Sent from my SM-G900F using Tapatalk

Morning all, One of my power steering hoses has split so I need to replace it. I've got some Halfords fluid in the garage. Will this be ok? Or does it need something else? Thanks Sam Sent from my SM-G900F using Tapatalk

Hi guys, I'm after some adjustable rear camber arms and eccentric bolts with the bigger washers for better camber/toe adjustment, if anyone has any? Thanks Sam

Bot sure on the technical name but I've just noticed I'm missing one of the little black boot springs which sit on the side of the underside of the boot lid. Not the strut. Does anyone have one of these they don't need? Thanks Sam

Sorted now, thanks guys. Sent from my SM-G900F using Tapatalk

Seems quite a bit of hate on here for these! Sent from my SM-G900F using Tapatalk

Cheers guys, if nothing comes up second hand I had planned to order from Tarmac anyway in a few months. Just trying to save a bit of cash if possible

Is anyone selling any? This sort of thing.. Closer to Southampton the better!

Where are you based? May be interested in viewing if you're not too far.

Sold!

Bump

Price revised - £5350 ono.

Sold.

Just had an offer accepted on a house so need this gone ideally.

Ha, his offer was closer to that than the asking price. And I'm afraid £60 more is still not particularly close to what I'd accept. I'm in no rush so happy to keep bumping for a decent set of rays. I'll PM you anyway though bud

Only chance I'll split is if someone wants to buy the car but would prefer not to have those parts I'm afraid.

Bump.