Adrian@TORQEN

Ha ha, I don't know why I didn't think about you on the GReddy airex stuff, have a few in stock, should have mentioned these to you a while back Anyway, was going to say BRAUM RACING, but hey, if you don't want to check the website, your choice...

Upgrades: 1. Air 2 Air mod - better and safer design, removing the water cooling - piping from Supercharger to intercooler eliminating Stillen Y intake and small dual filter design, Bypass Valve Mount adapter, Treadstone Intercooler rated for 750HP, Intercooler mounting brackets, all cold side piping and intakes - 2.75" Custom Y pipe with MAF housings - Blow through design will allow computer to see temps unlike current design, Manifold Block off plate, all silicone couplers and T-bolts. I was going to powdercoat the piping in candy apple red, to match the rest of the engine bay, but you can do whatever colour you like :) 2. Brand new InjectorDynamics 1050cc injectors - 1050.48.14.R35.6 3. SC Upgraded 9lbs pulley 4. TiAL blow off valve 5. Custom Cold Air Intake 6. Brand new 8-Rib Supercharger Pulley (3.47") - Jackshaft pulley (supercharger side behind the 9lbs pulley) - 2A038-347 7. Brand new 8-Rib High-Traction Supercharger Pulley (3.00") - Final pulley for the rear side of the supercharger for 12 psi - 2A038-300 8. Brand new Motorcraft YS267 New Idler Pulley - Bigger idler pulley on the back of the supercharger, reduces slip 9. Brand new Stillen Supercharger engine cover - 407737EC 10. Brand new Stillen Supercharger mounting bracket - 407737-02 11. Brand new Stillen MAFs and TB Extensions harnesses - 407737-101 12. Brand new AEM 320lph High Flow In-Tank Fuel Pump - 50-1000 13. Brand new MAP 4bar sensor - MAP-GTR-4BR 14. Brand new SC Gates belt - K071045 15. Brand new Vortech SC oil - TRQ-VSCOIL 16. Brand new Vortech SC oil plug £6,750 shipped or collected Free shipping anywhere in UK, collection also possible.

Simon, check this video:

Wait until you see what else we're adding

Hi Martin, HR doesn't specify anywhere what Aluminium they use for spacers and what steel for nuts. TORQEN S spacers are made from 6061-T6 low pressure Aluminium die casting. The studs are 40Cr steel with a strength of 10.9 grade, SGS certified. Lug nuts are made from 35# Steel with a strength of 6-8 grade. We sold hundreds of spacers that went on 350z, 370z, GT-Rs, Mustangs and so on. Filters now added: https://www.torqen.uk/nissan/350z/intakes/filters/3730-350z-hr-hks-super-hybrid-filter-2-piece-set-70017-an004.html

BLACK FRIDAY Sale? Why only for a day or a few days? It's been a phenomenal year for TORQEN, so as a big THANK YOU to each and every one of you, customer or simple friend of TORQEN, we're extending the SALE for a whoooooopping 46 days! New products added several times a day, keep checking! Let us know if there is anything special you'd like added to the SALE. https://www.torqen.uk/blackfriday

Hi Ian, Sure, see below:

Now available to order online here: https://www.torqen.uk/nissan/370z/body-styling/exterior/18886-370z-nismo-genuine-2018-darker-grey-door-handles-set-806xx-xxxxx806xx-xxxxx.html

Replied, Sir.

Now in stock, pics below.

Hi Seb, Must be @4RE Leather's old car?

Welcome to the club, Chris! When you did the clutch, did you replace the CSC when you did the clutch? How about the Master Cylinder? Did you try to bleed it again? What are the symptoms?

Hi Colin, We have these in stock, Sir! See here: https://www.torqen.uk/nissan/350z/engine/gaskets/3709-350z-nissan-oem-positive-crankcase-ventilation-pcv-valve-11810-8j102.html

Ben, PM me your number if you're on WhatsApp so we can send you some Invidia Gemini sounds etc.

Welcome to the forum! Let me know if I can help with any parts. You mentioned the seats, are you referring to the BRAUM Racing ones? They're absolutely awesome, all customers are over the moon with these. Body kit, have you seen the NSM body kit? Like the Nismo 370z, but for 350z, some pics below. Exclusively available in Europe at TORQEN.

2010 should be fine with the oil gallery gaskets, but asked the owner. Also look out for CSC replacement, they usually fail, normally you replace these while you do the clutch/flywheel. Also check the steering lock recall if it has been done. Other than that, check the normal stuff, rust, service history, visible oil leaks etc. Good luck finding the right car, post some pics once you got it!

Welcome to the forum!

Dave, can't see much from that photo, perhaps is worth taking a quick video. See this video on the installation: https://www.youtube.com/watch?v=cX-QyYX6-0k is your model different?

Hi Ben, If you want to try the HFC first, see these: https://www.torqen.uk/nissan/370z/exhausts/high-flow-cats/13861-370z-torqen-high-flow-cats-trq-vqhr-hfc.html Proven gains, nice deep slightly louder sound. Most of our Nismo 370z customers go for Invidia Gemini + TORQEN HFC linked above. https://www.torqen.uk/nissan/370z/exhausts/exhaust-systems/1937-370z-invidia-gemini-cat-back-exhaust-system-hs09n7zgis.html Another alternative is to use the short tails, see here: https://www.torqen.uk/nissan/370z/exhausts/exhaust-systems/18248-370z-torqen-short-tails-resonated.html#/tips-5_polished_tips_nismo - we're running 20% discounts on these for the forum members, 1-2 spots left. More options here: https://www.torqen.uk/84-exhaust-systems

Correct.

Last day at SEMA, few pics uploaded here, the rest on the same Facebook album here: https://www.facebook.com/media/set/?set=a.10156841296803809&type=1&l=3aaaf35e18

Some great announcement to follow sometime next week, but for now I can disclose that all Zakustech products and ZOCIETY products will be exclusive available in Europe via TORQEN! Did anyone say Zakustech metal louvers?

Thanks guys! Few more pics uploaded here, the rest are on Facebook here: https://www.facebook.com/media/set/?set=a.10156841296803809&type=1&l=3aaaf35e18

@fa57_ady @battalion_z @torqen

Don't feel like uploading 300 pics here, hence I uploaded them on FACEBOOK and shared the link