Adrian@TORQEN

Hmmm, thinking to buy this and include it with the red interior when I'm selling the 370z...

Finally! Another proper build thread! Very, very nice, buddy! Wait, you ordered something from GTM and you're hoping to arrive?! 0.0001 chances unfortunately, although I've seen Sam becoming active on US forums. Looking forward to the next updates.

Welcome to the forum!

Congrats, enjoy it! If the exhaust is too quiet, give us a shout

Stage 3 for your FI car, considering you want to play with the internals of your engine, too

madmikester is fitting a red set today on his 350z, I'll get him to report on here. No clips supplied, but we can look into this.

350z DE engine harness cover work in progress. They will be available in polished, powder coated in different colours and burnt titanium.

Ha ha, don't be mean, not everyone it's so bloody awesome at technical / mechanical stuff

Can source forged long or short blocks of required, ready built or built to specs.

Many guys fitting this weekend, photos will come up soon

350z fitting guide: 1. Open the box, unwrap the TORQEN undertray and admire it. 2. Take the hardware out from the plastic bag and pretend you're surprised it was included 3. Place the undertray with face down as in the photo: 4. Install the spacers and bolts in the holes shown in the photo: 5. The undertray is now ready to be fitted on the car, replacing all the old OEM bolts and clips. 6. Have a beer, don't forget to come back here and report how beautiful and useful it is, but also how much stiffer the front bumper is

I'm going to block your number just to show you how much I care about your finances! :lol:

Main post updated. Working on the fitting guide, hopefully have time to do it this weekend. Overwhelmed at the moment

- 3K cross weave carbon fiber - UV GEL Glossy coated - 3M double side - Perfect fit, easy install - Comes with screws and double side tape - Will fit the AMUSE bumper only In stock, ready to ship. £299

Plenty in stock now, £845 delivered. 10 x 350z Invidia Gemini Rolled Titanium Tip Cat-back Exhaust 6 x 350z Invidia Gemini Single Layer Titanium Tip Cat-back Exhaust 11 x 350z Invidia Gemini Rolled Stainless Steel Tip Cat-back Exhaust 11 x 370z Invidia Gemini Rolled Titanium Tip Cat-back Exhaust 4 x 370z Invidia Gemini Single Layer Titanium Tip Cat-back Exhaust 13 x 370z Invidia Gemini Stainless Steel Tip Cat-back Exhaust

Come on, Aaron, don't ruin that car, just drive and enjoy it! Better get a supercharger, leave he exhaust alone!

£250 saving compared to other places

Some real photos as promised

Sneaky! Did you login in his account again?! Nice to deal with you Paige, thanks a lot! Chris is a very, very luck guy!

Go to ZedShed or HorshamDev, both not very far from you I'd say. PM Keyser, he'll be able to help in between doing an LS3 swap, garage build and many other bits and bobs

Hi Rob, Sorry if I missed your PM, it's been hectic here after the bank holiday weekend. UPS picked up our stuff about 5pm, then we took the second round of shipments to them after 7:30pm I'll get back to you shortly, I'll have a look through the PMs again.

Wheel fitment templates for 350z and 370z added on the main post.

Guys, speak to glrnet / Graham, he has them on his car already

I thought you might like it They're 2mm thick in comparison to other models on the market, which would make stronger on any potential contacts with the road surface Some photos coming up shortly.

With an extensive history in developing exhaust systems for race applications in conjunction with feedback from Japan's top race teams, Tanabe exhaust systems achieve a perfect combination of a lightweight free-flowing straight-through design for maximum performance and durability for your 2009, 2010, 2011 or 2012 Nissan 370Z. Constructed entirely of SUS304 stainless steel with the exception of the Ultra Medalion titanium cat-back exhaust system, Tanabe exhaust systems weigh significantly less than factory installed stock exhaust systems by up to ~ 40%. SUS304 stainless steel construction results in the utilization of less material mass over mild steel, producing an exhaust that is lighter, stronger, and resistant to the elements. Each exhaust system is engineered from the catalytic converter to the rear of the vehicle without modification to any emissions equipment. A refined level of performance and driveability is available in the MEDALION TOURING. The elegant, well defined appearance of MEDALION TOURING is mature, and matches the artistry of a tastefully built, highly tuned machine. Using the all new 'continuous strand' ADVANTEX packing material technology, MEDALION TOURING acheives extremely high levels of exhaust system efficiency, while maintaining a street driveable, extremely low frequency and deep tone that is well under 93db for discreet sports driving. This system requires no removeable silencer for under 93db operation at all rpms. The extremely deep, low frequency tone keeps in-cabin noise to a minimum. The full SUS304 stainless MEDALION TOURING features a slim-line oval canister, and a special dual wall, angle-cut tip. This premium quality system is for sports driving. MEDALION TOURING's slim canister is pleasing to the eye, and is designed to allow for high ground clearance, for lowered vehicles. Tanabe was one of the first Japanese aftermarket companies to create full SUS304 stainless steel exhaust systems many years ago. The highest grade SUS304 stainless is used on all systems for maximum durability, as well as reduction in weight. Minimizing bends is a goal of each custom-built Tanabe exhaust system. The truest form is realized to minimize restrictions and maximize useable power gains. Where necessary, the piping is mandrel bent for improved exhaust flow characteristics. £1149 £999 Offer expires 30th of November 2015.