Jump to content

car350z

Members
  • Posts

    84
  • Joined

  • Last visited

Everything posted by car350z

  1. Seems to be a common issue, happens for me as well, though only occasionally and after many tries eventually it'll work again.
  2. Yes, that would be me. Yay, someone saw me! I live in Bracknell. Which way were you going?
  3. Well, it's now officially a rubbish movie. You don't just destroy Zed's for lolz and giggles, that's morally wrong! *strict*
  4. Oh no, not good. If it's really that expensive, then I think there'll be a Zed in parts for sale soon I haven't taken out the plugs or coils (I do computers, so 2 left hands with 10 thumbs) but will ask my mechanic to check that. I have the car booked in for new belts anyway, so he might as well take a look at those. Thanks a lot so far for everyone's suggestions, will keep this updated.
  5. It does burn a bit of oil, I guess that's what causes the blue'ish smoke.
  6. My good old JDM has now done about 100,000 miles. I recently noticed the following: I was driving on the Motorway, doing about 80mp/h (flowing with the traffic). I left the motorway via the slip road. At the end of this slip road is a traffic light which is usually red, so I have to stop. As I often do with my Tiptronic, I manually shift down to use the "engine brake". When I come to a stop, I notice a significant cloud of blue smoke from behind the car. I've taken it to my usual garage and they said it might be valve stem oil seals but they'd need to strip the engine to confirm, and quoted me about 2-3 grand for the replacement. They did say that they don't usually do this kind of work on the engine so this amount might be misleading (I hope it is). Are valve stem oil seals really that expensive to replace? Or what amount would I be looking at if I took it to an engine specialist? Or might it be something completely different? The cloud isn't massively dense, but it's enough to notice it floating by while waiting at the traffic lights... Funny thing is that this started happening after I had the engine terraclean'ed.
  7. I'd like one of these as well... had one but when I got new speakers fitted, the guy just ripped out anything he didn't understand (and binned it)
  8. I'm up for a set of smoked ones. Can you put me on the list pretty please? And please send me the payment details. Doesn't matter that much how long it takes, as long as they eventually arrive
  9. I already have one of those, they look really great, deffo much better than the original!
  10. I have 30s on the rear and 20s on the front and looks ace. Got stocks on at the moment but rays are the same size.
  11. 8K look really good. I think 10K or higher will get you police attention. 6K probably are the best compromise between brightness and look, but I prefer 8K
  12. I never liked the stock shift knob of my AT, but lacking a proper alternative (with the safete button thing) proved difficult until I came across the Momo one... Fitting is a breeze, only takes cutting about an inch off the inside plastic cap of the stock stick, takes 2 minutes in total and what an improvement! And no comments about AT!! A little love all around... Anyway, I thought I'd share a pic of the new one fitted and the old one next to it for comparison. The lower centre console bit is just wrapped in 3M brushed black aluminium film, I wasn't sure how it looked, but will take it off again (also because this isn't fitted properly).
  13. Thanks Dblock, I thought I read somewhere that it was the once-a-lifetime oil type (unless Nissan take 60.000 miles as a lifetime ) Alex, you have pm
  14. I noticed this a few days ago... usually when using tiptronic and downshifting, it is smooth enough and no problem. However, recently, when shifting down to 2nd, the actual shift is very hard and makes a bit of a noise, just as if the gear was forced really hard. This only happens when the revs in 3rd are lower than for 2nd (which is pretty much always the case, except you're about to stop). All other downshifts are normal and smooth, and when downshifting to accelerate, there's no problem. I know that not many people are smart enough to buy an AT ( ), but is this something I should be worried about? Is the gearbox going? The car now has about 95k miles. The AT transmission oil (if I remember correctly) is not meant to be changed. Is this really true? I can't remember though where I read this...
  15. There's also an azure roadster parked at the RedHat building every now and again.
  16. I've seen this one a few times now, parking in front of the Red Hat building, but never seen the owner. I'm parking in the designated multi-storey park just opposite (Blue Coat parking). Anyone from here?
  17. I was just thinking exactly the same!
  18. Saw two Zeds today, one right after I left work in IQ Farnborough, silver Coupe (was so excited that I didn't look at the license plate). Flashed and waved, driver waved back And another one in Bracknell, gunmetal (I believe) coupe (HJ52), looked very neat, nice wheels. Sounded good, too, though that might have been stock (I have never heard stock exhaust and I never see any Zeds around here). I was driving silver Coupe (RH53) Good day!
  19. I did see PU55 KAT at the Bracknell Sainsbury once though... azure roadster (I think)
  20. Thanks Leeroy, don't know why this went to the forum, was supposed to be a PM.
  21. Hi Leeroy, I'm in need of some spare wheels because I need my Rays refurbished (and for winter duty). Are these still up for grabs? I can collect them (I'm in Bracknell, so not too far). Please let me know as I need to coordinate with a friend (pretty sure I can't fit 4 of them in my boot Cheers, Carsten
  22. Sweet. I'm looking to replace mine as well, though I'd prefer Plasma ones, so I guess it'll be custom ones.
  23. I tried to capture it without sun but my camera shows lots of reflections. It does have an ever so slight blue'ish hue, but not as strong as the pictures suggest. I'll post more once I have the time to finish the rest of the center console.
  24. Fair enough... I buy my CF wrap on ebay. For the time being I only buy 3M Di-Noc, but I haven't tried Hexis yet. Supposedly they are somewhat similar, I guess you can't go wrong with either of them. I would hesitate to buy no-name stuff from China though... but you can always buy a small sheet and play around.
×
×
  • Create New...