Once installed, don't forget to go into system settings and turn the back camera on.
Thought I had wired it wrong until I realised haha.
Also thinking of changing to a permanent power source rather than the reversing light, cos then I can use the camera at any time, like while driving forwards and checking out what's behind me.
HaHa as if i would make such a rudimentary mistake
Cheers for the heads up
How many miles has the car done since it had the new clutch?
If you are absolutely sure its a standard clutch & flywheel Then it doesnt sound right, if its a lightweight one its fairly normal sounding...
I think spraying 3/2 of you car is a bit over the top, why not just stop at all of it
Why not choose 3 or 4 colours then start a poll see which one we like the best
Hope they didn't sand anything down
As a few others have said from experience that is not necessary and makes the job non-recoverable...
Great looking fish tanks, would love something like that but I lack the patience to maintain it...
Out of interest what are they wrapping the centre console with? Is it CF type stuff (di-noc) or a gloss type?
Once you unscrew and remove the actual dial module they bend away from the main centre console plenty enough for wrapping
That said i completely removed the pods from mine, jusr carefully cut the plastic and glued them back on after
I wrapped the whole of my interior myself with di-noc but foind it too dull and took it all off
Do you only get when you have been parked up say overnight? If so then it may be the parking brake as i know i get this ocassionaly and was worried it was the clicky axle. If it is just one click / clunk it isnt a clicky axle.
Nah they are the same but a lot less fiddly to fix it to the car instead of the console thats all, and handy being able to remove the centre console without removing the stereo and all the associated wiring
Inline booster? What for?
The HU is NOT linking to ANY standard equipment. Only all brand new stuff that I have installed.
Amps, Subs, speakers.... Not sure what I would need an inline booster for?
(Cheers for the shout though!)
Correct you only need to boosters to run the puny Bose Amps.... when I replaced my speakers and got an Amp fitted the boosters were not required
Jim what Pioneer are you fitting?
For my F900bt the 29-007 didn't work properly, you need the updated 29-020
If you are not sure email incartec they are really helpful and will let you know the best adapter to get.
I have a 29-007 knocking around somewhere as I replaced it with a 29-020, with the 007 the track selection buttons didn't work and it was really sluggish, with the 020 everything works great and much faster.
Also PM if you are getting a F900bt as I can point you in the direction of some VERY nice updates
Do a search for my posts in the I.C.E. section or drop me a PM