Niko

Has shine got a web site ? Just looked online and could find it if they do.

Hi all. Dose anyone know where I can get a good replica amuse front bumper from?

This can be closed now as I've done the swap cheers.

This is the guide I used. viewtopic.php?f=35&t=19516

There 30.48mm I think.

Cheers Tarmac

First a big thanks to Tarmac for the springs, and awesome service as usuall . I've had the springs on now for almost a week. Fitting them was not as hard as I thought it would be see this thread for fitting guide / details (newbie friendly) viewtopic.php?f=35&t=64939&p=933764#p933764 After driving around on all sorts of different roads, the ride is slightly stiffer but still comfortable. The body rolls much less and corners pretty flat through the bends. It's lowered the car by 1-2 inches all round. As for speed bumps YES it does scrape its belly on some of them but not all, tends to be the usual suspects! The traffic pillows mostly! you just have to adjust your driving style and not go over them at light speed lol. Overall I'm very happy with the springs and the overall look of the car now. Just need to get rid of those silly balloon tyres ;-) Here it is lowed

Here is a before and after.

Hi all this will be my first guide if it's not pretty I apologise feel fre to amend anything admin Firstly I'd like to say big thanks to Tarmac for the springs and awesome service. First I removed the  for the  strut brace and loosened the 3 <14mm?> top mount  nuts and the <21mm?> shocker centre nut for the suspension. (hint, don't remove the centre nut for the suspension just yet! That would be painful!) Then jack up and take off the wheel. Remove the <17mm?> anti roll bar drop link nut and move drop link out of the way. This gives the hub room to move downwards to remove the shocker later!  You'll need 2 x 17mm sockets to remove the shocker bottom bolt next. Undo the 3 x <14mm?> shocker top nuts completely now, your suspension should be relatively free to move around now. We found this way best because it allows you to get a 14mm socket onto the top A-Arm bolts in order to remove them, without doing this first you can only just fit a spanner in there! (the arms attached to the bodywork just below the top of the suspension.) After pulling the A-Arm away from its mountings, your suspension should be ready to remove. When you get the shocker out, compress the spring with suitable spring compressors.  Once the load has been removed from the top mount,  remove the 21mm top nut then you can pull off the top mount and dust cover assembly. Then remove the old spring and undo the spring compressors (carefully!) Get your new spring and fit in reverse! Making sure its the right way around! On mine this was With the writing upside down on the springs... Follow the steps in reverse to install For the rear it's even easier For the rear just jack up take off the wheel Then with the 17mm take off the rear spring coupe bolt think I used a spaner too After that push down the cup beeing cearfull as the spring will be under tention, once youve relised the tention move the spring about and remove the rubber cone holding the spring good to have an extra per of hands to help you out, ones the spring is out take out the bottom rubber locator Fit the rubber cone and bottom locator and fit the spring back Use a second jack to the cup and the spring into place then bolt everything back up

Cheers guys, I did have a go this morning but gave up as I thought it was too tight to get my hand in, I think I'll try taking off the bumper

Hi all. Is there a guide on how to to this? I've had a look at it this morning but it looks like a lot of stuff has to come off. is there an easy way to do it? Cheers

Im still after some tinted ones. I'll do a swap with you?

Yeah it was good fun

Lol. I would have wondered who it was at first but I'm sure I would have recognised you. One I got to tescos roundabout I had a little play with a impreza p1 lol.

Hi Tarmac. Is this a one off or will you be getting more kits in the future?

cheers. ill give it a go when it get here

Hi guys and girls. Dose anyone know we're I can get a template for the front bumper air intake?. As the one on its way doesn't have one. Cheers.

nice car , I'm also in chesterfield. Mines a sunset with gunmetal gray rays.

+1 for the one in your pic

All the best bubby with the new car, don't be a stranger to the forum!

o/e painted Nice one Cheers.

Very nice , and can I ask we're did you get you're wheel nuts from? As I'm after some for my sunset.

Pm sent

http://www.ebay.co.uk/itm/350z-Nismo-Bu ... _500wt_922