Cookbot

Just to let those who have ordered know, the turn around time is probably going to be 1 month, as delivery is taking so long. I ordered the parts over 3 weeks ago and still nothing has arrived As for availability, probably up to next Jan, but then I move to Florida. If there's still enough interest, I'll buy some cubbys there and bring them back with me which should make it a little cheaper.

It looks like olivergreenhill is getting it.

These are still available and open to sensible offers. I'll get some photos up this weekend of them clean and off the car. Cookie

Ok, this is still for sale and the first person that rocks up to my house with the cash gets the S/C. Let the racing begin!!!

Provisionally sold, although I'll take reserves. Cookie

You can connect it to your head unit, but you'll get ground loop hum. You need a ground loop isolator.

Yep, it was designed for a pre facelift car, I had to mod the bracket to fit an 06 car. I don't think anyone will ever go FI cheaper than this! All that's needed to finish is a fuel return kit or just use all the original HKS parts and sell the injectors and pump.

As the car and the HKS super charger is going I don't really have much use for these wheels anymore. Although slightly dirty in the pic, they're immaculate with no curbing or scrapes what so ever. they're 19" with 245 front, 275 rear and fit straight on with no rubbing. £850 4-5mm of tread on the front, 5-6mm on the rear.

I'm selling my 19" GTR's in gunmetal grey. They're in the for sale section.

Redundancy has meant my FI dream was never meant to be, which is even more gutting considering I had pretty much everything I needed to do fit it. Gutted is an understatement though..... Included is the full HKS SC kit, this is enough to fit to a car and if you use the provided piggyback ecu and injectors will work fine. Also included are 6x APS 440cc injectors as I was going to fit to an 06 car Brand new boxed Walbro 255ltr/hr fuel pump As you can see the HKS bracket has been modded and wielded so it will fit on a facelift car. Any Q's PM me. Cookie

I've been to the Nissan garage today and managed to get the cubby surrounds at £108 and £14 for the finisher plate. There's now a finalized price in my thread on the first post: http://www.350z-uk.com/forum/viewtopic.php?f=38&t=49801 There's also a chance your cubby may also already work. I've just seen the cubby that Eck1 has on his 03 JDM and that will be fine for him as the box is removable from the back. Cookie

I'm still struggling to get these with out paying bloated dealer prices, as they want about £130 which makes the unit cost over £500. I can do it if you want it enough though. The cubby in question is here and if you can source one your self, the price in the 1st post stands: http://www.conceptzperformance.com/cart/description.php?II=4234&Car_Type=NIS350&UID=2011030209522066.249.68.229 You'll also need this too: http://www.conceptzperformance.com/cart/description.php?II=4190&Car_Type=NIS350&UID=2011060815033492.41.9.181 I might be moving to Florida for 5 month next Jan so will be able to bring a load back probably. Cookie

I'm able to repair these, but I'm struggling to find a brush supplier that doesn't want to provide in the 100's! Cookie

Mine will be going some time soon... to be replaced by a new'ish GTR.

If people are desperate to have this device of wonders in there car, I can get the cubby and blanking plate from nissan, but it's likely to be about £140 just for the plastics alone. R35lee can get em less, so was just going to wait for him to get back to me. If you do want now bet on it been about £515 with only an 8gb card!! Just fitted the screen to Ken's car today in prep of the parts coming in the next fortnight and can confirm that for those of you with birdviews, it fits well although the button location will be brought forward onto the flat section so not to interfere with the touch screen, unless you'd rather have them there, it's your nav!!! Cookie

Hmm, doesn't bode well for those folk!

http://www.facebook.com/video/video.php?v=494093145764 You'll have to have a facebook account to view so if you're old its not my fault you can't view it It's a video we made on the way to Italy. You should be able hear the can in the Gothard tunnel....

Yep the termignoni can sounds sweet and only paid £150 for it with the harris hanger on the mighty flee bay!

Just finished fitting the fairings back on the having just had them sprayed gloss black for £100. What do you think? does it beat the Z in blingness? p.s I forgot to take the front fender to the sprayers, it's still bright red....

Got this from the gadget shop a few years ago. Remote control blade Z with nismo alloys and body kit. Winner!!!

Lookin' good, FTW!

Since having my light weight single mass flywheel, I've been keeping the revs above 2500 and the economy seems to have gone up!

Follow this link for the (sort of) finalized version: http://www.350z-uk.com/forum/viewtopic.php?f=38&t=49801 Cookie

Just me too. Cookie

Q's answered in first post. Cookie