Husky

it seems very common these days of used zeds appearing with ill fitting alloys. It seems the reason for this is the alloy wheel distributors having very little clue of what actually fits the zed. That combined with places like kwikshit not understanding the tyre sizing. the root cause of it all though is cheap skate owners with no idea what they are doing. gives someone like you something to sort out and make your own though

I think I may be best off starting all this again when I know the info But, on a separate yet related note, the fact that I have to have the spacers, and are STILL not sticking out from the arches, kind of suggests the wheels are not wide enough for the car......? its the offset that dictates how much they stick out combined with width, an offset of 40 with a width of 8" is shart Exactly... so if I have a spacer (to compensate for the offset) AND they STILL don't fill the arches... Then they are a VERY "thin" wheel, in comparison to the original ones... yeah? and the offset is ass, yes.

when i kerbed mine in a tiny way i cried for hours like a baby. got those alloygators on now, look ok actually and i feel far less stressed!!!

I think I may be best off starting all this again when I know the info But, on a separate yet related note, the fact that I have to have the spacers, and are STILL not sticking out from the arches, kind of suggests the wheels are not wide enough for the car......? its the offset that dictates how much they stick out combined with width, an offset of 40 with a width of 8" is shart

yes Not sure Bud.... Other than asking the previous owner, how can I find out? (No info in the bumpf I got with the car) take the wheel off, it will be stamped on the inside

my honest opinion... I'd bin them on ebay and get something that fits without having skinny tyres and massive spacers

It's always been 99 up here, I've been using it for 2 years. +1

i assume this is the spec of the offending rims

ealrier "struts" were mentioned by josh, this should be studs. otherwise it doesnt make any sense the whole spacer/no spacer argument is on a different thread and is probably best to continue on the same thread to keep continuity of the topic. viewtopic.php?f=61&t=40232&hilit=spacers+view You would normally want 275/35R19 tyres for the back, however your rims are pretty skinny so probably wouldn't fit with that size. Here's a thought, seeing as you have 225 on the front why not go for 245 on the back with a 40 profile? Its like trying to make a wedding cake from dog @*!# with these rims. no offence.

where did you think i was going with that... Oh yes, i am that good check here bud http://www.miata.net/garage/tirecalc.html although your fronts you can get away with the backs are not great. Still, the fronts are skinny.

so

me?

trim removal tools should cost pennies, can pick them up from machine mart or something if i recall

doh?

down the side of the car is best for seeing offset

Dont bother starting a new thread, hit the search button there are plenty of threads to reaed already out there. Yes the zed has a staggered wheel size front to back. the stock size is 225/45r18 & 245/45r18 work from that rolling radius in a tyre calculator and figure out wwhat you need. most likely it will be 245 front and 275 back unless the rims you have are exceptionally skinny. have you got a picture so we can have a look at the offset?

100% easy to go camping in the zed! do it! you wont regret it. climbing out the tent in the morning, am i the only one who stood there in shorts and unlaced walking boots squinting in the morning sun at how pretty she is

that could very well be your problem. put vred's on the back to match and job done check the tread wear at the same time EDIT: i only glanced and didnt notice the sizes what is going on there someone shove them in a tyre calc.

So if the TCS doesnt kick in with a good tyre set up why turn it Off? for those moments you might hit some diesel or wet patches on the road? P.S i often floor my Z half way around a corner and no signs of the back wanting to come out atall? im in agreement, since i put the "monsters" on my TC barely ever comes on, infact its dam hard work to get the back tyres to shift in any situation, including the wet. i used to hit the button when i had my nankangs on because it would let go at such a low speed it felt pretty safe, now i have to be going such a stupid speed that if it goes wrong im officially over. Huge tyres all the way

if you take the spare wheel out when you go to the PO you can get that pesky elephant in there

Right, final decision is.... dum dum dum dah!!! im just ignoring it, done a fair bit of reading now, links from people on this thread and others i have found: http://forums.pepipoo.com/lofiversion/i ... 51770.html http://gutt.co.uk/2010/05/06/don%E2%80% ... r-tickets/ http://forums.pepipoo.com/lofiversion/i ... 52108.html http://forums.pepipoo.com/index.php?showtopic=46975 http://forums.moneysavingexpert.com/sho ... ?t=2214803 Here is the quick rundown of why i'm ignoring it Cheers for the input guys hopefully this helps people when one of these mickey mouse tickets arrive in the future. It's no more valid than the 1billion pound win scratch card that comes through your door with the rest of the junk mail I'll update you from prison in a months time yes a big pat on the back to all those who said ignore it EDIT: and im not ringing them, anything i say can be used against me and apparently this just puts me on a priority list as they think im an easy mark.

rob (H5) had his done i believe, its some thud they make afterward, probably because each one now weighs enough to sink a sizeable ship

i think ive played every one worht playing and completed them all, became a bit easy. how sad of me, but then stuck in a hotel now and again has that effect

faceplant games are always a no no i just downloaded a bunch of games from when i was younger; quake's, hexen, heretic, wolfenstein, monkey island, roller coaster tycoon, etc etc, should keep me going for a fair while and away from evil tower defence games

noob