Greeny
which line did you order , hell or goodridge ?
either way post up when you get them done as im after some now just to cure the lilttle bit of spongeyness but im not sure if the extra for goodridge is worth it or just get Hell plus find some extra clamps.
well from my track time today at rockingham id say braided lines first ! i had barely any fade of most of which id say most of it was due to the hose expansion but ive got slotted/drilled disc ans ferrodos all round.
3 but not for speeding , had some A hole right up my rear coming off the motorway so ran an AMBER to aoiv geting hit and the pigs pulled me for it , yes i am bitter !
3 years ago so nearly clean , no speeding .
My guess would be a previous owner had the knob off before and has threadlocked itback on . Take the surround off so you can get dime mole grips or alike directly to the base of the shaft to hold it and probably a helper to undo the knob .
I got them from a forum member used. They are about £450 new , pretty sure a couple if the traders have them and i think zmanalex may have some still. Definatly worth it for me finally unleashes the z exhaust noise
jvc avx820 , worked flautlessly wiht iphone 3g but now it connects and plays , can do trakc up and down but it wont open the iphones file list . its liek its not in head mode but the iphone says accessory connected !
good job i dont use the iphone much as i have an 80gb hdd
go race cats , will pass mot least they should just , if you get the berks like i have they come with anti foulers so wont throw a cel.
you will gain a little power but not alot , sounds a bit louder more tuned .
ive got a tube wiht a metal venturi funnel on the end runnign from right at the bottom of my grille back up to the air box and besides from tonnnes of buggs (i have to empty it out my filter every so often) no water gets sucked up in very heavy rain although ive not been silly enough to try driving through any deep puddles that may splash right over it . should still be ok though as you have to maintain an seal wiht the water or it would just fall out.
should do , front will fine definatly , back should do as its only 10mm over standard but may bulge a bit as theyre only 8's but i cant see it being an issue. less others know better >?
I'm sure the engine cover saves at least 10grams vs the plastic one least that's what I'm telling myself . Bad carbon magpie , don't buy shiney black stuff
Front spliter
Engine cover
B pillars
Wrapped side markers
cheapest options is a cheap Y pipe or get one wiht the exhaust and some berk cats , berks about £450 new but i tihnk Zmanalex may still have a set used .
Y pipe will make a small change if thats what your after , as i said above the bits all add up. you could get the y pipe then if yous till want more get a new exhaust the Y pipe wont be wasted as alot dont come with one.
From my experience of oem to quiet y back Exhaust , adding y pipe and now some berk cats I'd say unless your the really loud exhaust type I'd go with one if the quieter exhausts as others gave mentioned to start with . If it's not enough add HFCs they make quite a big change. My fujitsubo was quiet then lil growly and now quite racey so all the bits add up.