SHEZZA

Hopefully see you there Dave. I owe you a beer/coke.

£15 for a day ticket

It's my first time going to this so not sure about what's going to happen Sunday but have a look here for what's on. Seems to be plenty going on, on the Sunday. http://www.japcarclub.org/

Here you go , copied from website 2003-2005 Nissan 350Z (single throttle body engine models)- Will NOT fit the 2006 350Z models. 2003-2007 Infiniti G35 (single throttle body engine models) 2003-2008 Infiniti FX35 This new intake plenum replaces the upper half of your factory intake manifold. This plenum bolts directly up to your car with zero modifications, and also allows the use of the factory strut bar, and engine cover. This unit will fit the 350z, the G35, and the FX. *** Kinetix's engine cover may not fit with the G35 or the FX35 when using this plenum. ** This plenum increases the volume to the middle and more importantly the front cylinders. The factory plenum utilizes a very aggressive angle as it caps off the front cylinders. This new plenum equalizes the flow to all cylinders, while also increasing the total plenum volume. This plenum also uses a very versatile plastic to achieve a smooth interior for superior flow properties. The plastic also allows a lighter overall weight, by about 3 lbs. The overall temperatures of the plenum have also decreased by about 50 degrees Fahrenheit. This helps with heat soak problems and to help lower air intake temperatures. Our plenum has shown a solid peak gain of 14 rwhp and a consistent gain throughout the RPM range. When matched up with our high flow cats, they together have shown peak gains of 20 rwhp. The plenum still retains all factory mounting points and also includes all necessary new hardware. The plenum also includes a permanently adhered flange gasket that is to be used with the factory gasket as well as a new throttle body gasket. Hope this helps.

For sale I have a Kinetix V + plenum for DE engine ( not rev-up ) which I recently bought from the states on an impulse . I fitted it to my car and it was on literally a day and I decided it wasn't for me ! As I prefer the look of the OEM one. I'm looking for £195 collected or £210 including p&p

Nice one. I had a couple of dings removed last year, I couldn't watch when the hammer came out. You'd never know they were there now.

There should be someone on the gate all day and night as they cant lock us in (or out) Ok Gaz cheers , I've also emailed the JAE team to see what they say. See you at the weekend.

That's a standard bumper that's been sprayed.

Gaz if I was to come on the Friday evening after work, what is the latest you can arrive to purchase tickets and get in to pitch a tent.

Damn beat me too it ! Poor Zed.

19" Rays as in LMGT4's ? Thought they filled the arches pretty well.

Nice one. Oh and get that rear wiper blade replaced ! Haha.

Nice one. Oh and get that rear wiper blade replaced ! Haha

Here's some Avon's on tyre leader that were manufactured in 2012. To keep you going till MPSS time maybe. Should be good for a couple of years. http://www.tyreleader.co.uk/car-tyres/avon/zz3/225-45-r18-95y-369159 I've always found tyre leader good. Here's the MPSS http://www.tyreleader.co.uk/car-tyres/michelin/pilot-super-sport/225-45-zr18-95y-190353 http://www.tyreleader.co.uk/car-tyres/michelin/pilot-super-sport/245-45-zr18-100y-190360

Yes as suspected the metal bracket at the bottom of the strut with the two bolts in it is the wrong way around.just take the two bolts out and just flip the bracket around. Get some to help you to hold the boot up while you do it and that will sort it.

At a guess the gas boot struts have been replaced and the brackets have been fitted upside down. Have you got any pictures of the boot open showing the struts

I'm with Zeus on this one. Exact same reason I changed my DE to a HR plus the fact the paint had ,had it on the DE bonnet. Gave me the perfect excuse ! Haha

PM Sent.

What's the tread depth of the good one you have left ?

Very nice Steve, they are rather dishy those. I see you have turned to the dark side of the MPSS.

Thought I'd share this as its a new one on me. This morning at work a colleague of mine was trying to find out why his drivers side electric window had stopped working. After checking the fuses and everything was found to be ok he then went to his tool bag to start taking panels off ext.... and it was no where to be seen ! First thoughts was that he'd left it on a job on Friday and with it being the weekend had not realized it was missing. Anyway after a bit of investigation we saw that the cable conduit from the door pillar to the door had a slice in it and when pulling it apart some cables had been cut. When the door was shut you could see that someone had rubbed the dirt off the door where the gap is between the wing and the door where they must have slid some narrow cutters in maybe even scissors and cut through the wire which opened the doors and then made off with his hand tools! About £600 worth. Luckily he keeps his power tools in a lock box and they was safe. He's even got CCTV and that didn't deter the B@#%ards

Been to the the Eden project today and just had to post this ! Michelin too ! Haha

Your showing your age Papa.

Seems daft if you ask me to get your wheels refurbed then have brand new tyres fitted that are mixed. Can they not just refit your old front ones till the MPSS Arive

Was gonna say wonder if it was one of the orange ST's I saw at Trax this year, as there was a whole club stand of about 10 of them ! and no other colours. Though I guess not as its from 2009.