BulletMagnet

Here's mine No cabin drone

LMAO Brilliant

First pick a budget you a comfortable spending and then pick stuff till budget runs out

I foresee a Chris & Bob roadtrip with ThunderZed 1 of International Zed Rescue

thanks i was suppose to comment back on the other thread but forgot lol but yeh it does now thanks for your help! No worries, i help if i can

Good job And does the Bluetooth phone work on the front speakers?

Had to call it a day from sanding tonight as fading sunlight and mozzies put an end to todays session. But i am glad to say i have been keeping my beady eye on the surface to make sure it's absolutely flat. Just got one more area around one of the vents to do and then it's 1200 grit time

doesn't even take a minute to get gear surround out and access the wiring loom, do it properly tomorrow

I think the signal for Bluetooth enabled headunits normally send the signal to the front speakers, as any car will have front speakers with some having rears as an option. easy way to find out is to plug your rears into the front channel and test it out

Attacked it again with 1000 grit today. After weeks and the lacquer fully drying, it turns out i didn't flatten the imperfections enough, so the patches in the very first pic reappeared. So today i took the bonnet off again to do it over again. I have since learnt that my first time sanding was incorrect by using hand only, so this time I am using a block to help and keeping a good eye on flattening every thing down this time round. Sanding continues tomorrow

If your steering wheel buttons work fine then that wire goes nowhere, i think it's to link up with the computer that programmes it

Door card needs to come off as it hooks into the tweeter plate. The tweeter plate itself is held with two popper prongs and the upper corner by the rubber seal, be careful not to snap the top corner. After that it's only two screws and the tweeter is out.

Oh interesting but off topic, I'd like to know how hard it was to fit the upper HU into the cubby, much trouble?

Ok ok ok final offer £53.74

We all tend to agree that JapSpeed is a brand that is to be avoided. Fitment will most likely be an issue (previously had K1 & K2) And if a company claims that it is your car that's bent and not their exhausts, then that just does not put much faith in anything they make. Best avoid and look elsewhere. Just my opinion anyway

Errrr why?? And these a just the ones since the new forum lost a lot of the old threads! Still seems a reasonably popular topic...unfortunately for you lol What he means is... USE THE SEARCH BUTTON!!!

ahhhh, i see

AFAIK Snow socks only work on snow, but not on snow cleared tarmac. Winter tyres do

That's deffo an aftermarket/DIY SatNav too, OEM one has rows of buttons in front of the screen

Remote control sensor?

Take the spare out the boot and you can fit a full set

oh, maybe its on the inside on yours?? I truly hope not! I can imagine that being more hassle than its worth. Meguiars do a headlight restoration kit too

Just don't be tempted to use Autosol as that is too abrasive

Shown the recent vids to a colleague at work who owns a very very clean Mk I Golf. He likes your work Tim

Have you asked Tarmac yet?