BulletMagnet

Welcome to the proper wheel club

Yeah, I think you are spot on with that, just had a look at some pics of my car and you see that the wheelnuts sit deeper in the fronts than the rear. Thanks for that tez

Fronts are 19"x9.5J offset +28 Rears are 19"x10.5J offset +23

front is +28 and rear is +23 tez

Ok, had a call and I now need a little help. The wheels have been split and are getting processed, but unfortunately they forgot to mark up which are the rear and which are the front centres. How do we now now which is which offset? They have looked at the inside of the spokes, but there does not seem to be a number stamped on them saying "+23+ and "+28". What do they use? Any help would be very much appreciated.

If you mean me, then they are Volk SF Challenge in 19", but you'd have to increase your budget quite a bit for them. Got them from a trader that has sadly closed shop.

Any animals taken shalter in the airbox?

+1 Can't go wrong by sticking to the lower end of the alphabet Weds Work Volk

Go for a proper pimp gangsta Lincoln Navigator with 22" chome rims, lol

Get a new set of speakers to replace existing ones and make sure you install a powerful subwoofer, then play a track that hits 33Hz alot to show your missus how thankful you are

No progress on the wheels as yet, but took some time to attempt to clean up the centre caps. There is some tough stuff on there and sadly this is the best I can clean them up...

On another note, one of my friends has these on his Toyota Celica Gen7, and one of the LEDs in the row is starting to fade and looks odd while the others are still fully bright. I did say he could try and replace it and it would invole opening the lights and soldering, to which he said "Oh sod that"

You prolly seen me too, I'm the only chinese berth-op at the port

Worked on her and her sister Estelle. I tell you what, it ain't fun dropping decks/ lashing decks on them when there is hardly any underdeck and mostly deck load on a 23-wide, Maersk cross-over lash & belly bar configuration, in the rain.... I've probably stood there watching you do it too Since when do you work at Felixstowe?

Worked on her and her sister Estelle. I tell you what, it ain't fun dropping decks/ lashing decks on them when there is hardly any underdeck and mostly deck load on a 23-wide, Maersk cross-over lash & belly bar configuration, in the rain....

Go forced induction, car will look the same, but drive totally different than you are used to. So many subtle and loud bodykits to choose from and even more choice on wheels. Make your Zed even more personal.

***phone rings*** I pick up and say "Hello?" Voice on other end says "Hello, am I speaking to Mr.Ng?" "Yes, who is calling please?" "Hi, I am calling from your borough council" "Oh really? On a bank holiday?" ***click***

It's pretty cool tho, it comes with another set of tyres for drifting. And to swap them you need to split the rims, so it's got 2-piece split rims too, haha

You do realize that the DAS6, and maybe the G220, can be used as orbital sanders

Since it was my birthday this weekend, I was given a Zed as a present. Totally out the blue and took me by total suprise. At first glance I can make out a few mods which are: - Nismo front bumper - Nismo sideskirts - Nismo rear spats - 19" Racing Hart CR 6-spokes - unidentified rear spoiler - custom paintjob with airbrushed graphics - polished powersteering and washer bottles - Cold air intake - JWT Popcharger - polished plenum - bonnet dampers - custom exhaust with 4" rolled tips Here are the pics

Since the "PM ZMANALEX" failed, have you tried the "PM R35LEE" option?

Basic technique http://www.youtube.com/watch?v=4jhB0dlST_0 Just search YouTube for "Vinyl Wrapping"

Holy moly resurrection win!!! Places off the top of my head CS ( trader on here ) Abbey Motorsport ( who can supply and fit ) TarmacSportz maybe, best PM Tarmac about it R35LEE, ask if Falcon Performance can supply and fit

And taking your time is the key when you do it. And the use of a hairdryer

For just backing up purposes, you could get a Sharkoon QuickPort http://www.scan.co.uk/products/sharkoon ... 5-for-usb3 And then store the harddrives themselves.