Greg Warnes

Now Sold. Please lock thread

Thanks, are they in stock?

door switch required, believe part number is 25360-AD000 ideally a new one, but will take second hand.

Price Dropped to £650 for both items as a set.

No sorry

Yes, still available 👍

Forgot to add, fitment on my 2004 was perfect.

Exhaust and Y Pipe installed back in 2015, my car has done less than 4000 miles since install. Post from 2015 with sound clips. Exhaust is currently in Gosport Hampshire, i work in Farnborough Hampshire so collection is good from both locations. I have no idea of costs to ship if collection not possible, but will confirm with buyer if required. Ideally wish to sell exhaust and y pipe for £900, will consider splitting if they dont sell together. there is absolutely no damage to the flexi's, no scuffs or dents on all of the system. This is a loud, deep noted exhaust. The Y pipe allows you to change the canister for a Cat or Straight Through Section (not included) You will require a fitting kit (bolts and Gaskets)

Kev I have a full Tanabe system fitted, its going to be coming off the car in the next few weeks. Bloody lovely build quality and sound, but a tad loud for me. Exhaust can be seen here : http://www.350z-uk.com/topic/97331-tanabe-medallion-concept-g-exhaust-initial-thoughts/ Its been on the car for a year and only covered approx 2000 miles (was fitted the day before the last MOT) If your interested Pm or continue discussion on this thread.

Congrats Adrian

I don't think the UK cars have the CD Port connection on the back like the US cars do, so if the wiring diagram shown is technically correct you wont be able to use it on a UK car.

Cover sold, money received. Mod's please can you lock thread.

PM replied to

Barely used, in very good condition Does just fit over a nismo spoiler if fitted. Will need washing before use. £20 collection from Hampshire or can deliver for £5 extra. Further product info can be found here: http://www.cover-zone.com/sahara-car-covers.htm Sent from my iPad using Tapatalk

That nut should be split pinned, so do as Ekona suggests and then fit a split pin. All will be well.

Have a look at POR 15, its a paint and comes in a few colours. It would be ideal.

What time?

First time with Youtube videos set to public

?

Video as requested: Cold Start: Warm Start with a little rev:

Never really looked at air ride before, but the kit with remote control :notworthy:

Eibach website shows two differing versions (system 4 with studs installed in spacer & system 6 with loose studs to be installed in hub) http://web2.carparts-cat.com/default.aspx?230=1&34=0,2047567&36=3792&35=0&32=17435&14=4&10=FAE3D757A29D4DDE8B15D7024B32B2B1279004&12=130

There are two different fitments, you have one of each. Both are normal and work

Drift out the existing front studs. Fit the new ones supplied, push the new stud into the hub using, place a lot of sturdy washers over the new stud then using a Nut (preferably an old one) tighten the nut until the stud is pulled firmly into the hub.

With the above, you will still get a flat battery as its designed to allow the alarm to still get power but not start the car. The black wire in the picture would normally remain connected allowing a small current to the alarm etc. Solar panel (as above) or a battery charger/ conditioner are better options.