removing green from rubber seals

[gazzard27]

Hi guys as above

tips n tricks for getting the seals looking n getting green off ?

 

Thanks

reece

[Renegade]

If you mean the green moss that grows on the window seals I wipe it off with a wet cloth.

[Flex]

Speak to Keyser, he's good with green.

[WhackyWill]

Get some Auto Glym Bumper & Trim Gel

[Stutopia]

Any decent APC should shift it, a soft toothbrush might be a good thing to get in there (don't put it back next to your sink though )

 

If it's been neglected (which it sounds like it) I'd suggest that once you have cleaned, rinsed and dried it, try some gummi pfledge to look after it.

 

http://www.micksgarage.com/proddetails.aspx?pid=1584628

 

 

[ilogikal1]

Any decent APC should shift it, a soft toothbrush might be a good thing to get in there (don't put it back next to your sink though )

 

If it's been neglected (which it sounds like it) I'd suggest that once you have cleaned, rinsed and dried it, try some gummi pfledge to look after it.

 

http://www.micksgara...spx?pid=1584628

 

My young Padawan here has all the answers you seek. Except the toothbrush; use the wife's, then you can even put it back afterwards.

 

The rubber seals on the Z are easily accessible, so a microfibre cloth might be easier than a brush. I'd also recommend using Gummi Pfledge on rubber after cleaning with APC regardless of it's previous state as it will prevent the APC from drying the rubber out too much.

[gazzard27]

Thanks for all the help guys i'll give it a go just didnt want to mark the rubber etc lol

[Stutopia]

Thanks for all the help guys i'll give it a go just didnt want to mark the rubber etc lol

 

Just be gentle to start with, you can always go harder (ooo err) or do a test spot if you're worried.