Jump to content

Front Bumper trim


Recommended Posts

Posted

I've had my front bumper re sprayed and the people that done it haven't put the rubber trim back after doing this.

I now have a front bumper with the large middle rubber trim attached but not the 2 that are directly in front of the front wheels. I've tried to buy these new from a dealer but apparently you have the buy the whole wheel guard to get these parts.

Can anyone help?!

Posted

Sat through loads of those with the parts guy at my local dealers, he says it probably comes as part of the first diagram you posted, but you have to buy the whole thing.

It's just the stock bumper.

Pics of the non existent part below. The nuts have been put back but no blade.

AB23FC1F-707A-4132-82E1-8396B7CD4665_zpsa4wj4mki.jpg

A28374DE-946C-42E6-8FA6-CFE75B6B45D5_zpsdrsjyyey.jpg

Posted

Do you have an engine under tray fitted ?

 

Are the front arch liners fitted? the part circled in Buster's schematic.

 

I think that you should start some dialogue with the paint shop who painted your bumper.

Posted

Yeah the under tray is fitted, the guy at the dealership told me that they come with the wheel guard, mine has the wheel guard but these parts are individual but you can't buy them new individually.

I think I need to find a breakers or someone that this part used somewhere.

Posted

Already had massive rows with them about that, they reckon they were already missing.

They weren't but I got no way of proving that, I already had them replace the trim around the windscreen because they didn't refit that properly and that blew off.

Posted

So what parts do you think you actually require ?

 

I am dismantling 3 x 350Zs at the moment so may be able to help, however you will have to be much clearer on what you require.

 

Alex. :)

Posted

It's a rubber blade that sits on the bumper directly in front of both front wheels. Probably 6-8 inches long.

In the second picture I posted the nuts are where the part should be, just no part.

I'll see if I can find a picture of the part fitted but that might prove difficult.

Posted

All the picture on the net and previous ones I've taken of mine are at the wrong angle.

Unless you take the picture from the floor it doesn't show the part as it sits under the bumper.

Most new cars have this part, although sometimes it's connected to the wheel guard.

Perhaps there's someone that has a stock bumper on their car that could post a picture?

Posted

I would suggest that you get under your car and take a picture which should clearly show which part is missing, then and only then can we offer informed advice, however I think that the garage may have chopped the front arch liners by your description.

Posted

The part you think you are missing does not exist. There is no bar in front of the front wheels but i think the arch liner should come out to those 2 bolts. I'm assuming the shop have tucked the whole thing inside the bumper.

Posted

Oh well I'll give up then. The picture of the one you posted hasn't even got the large rubber trim under the grill on it. And there are no close up pictures of the underside of front bumpers on Google. Can hardly see it from 20 feet away.

Posted

WARNING!! HUGE BLOODY PICTURE :lol: You can see to the right of this image the front "spoiler" and the 2 arch liners. No 'bars' or anything in front of the wheels.zbottom.jpg

Posted

Oh well I'll give up then. The picture of the one you posted hasn't even got the large rubber trim under the grill on it. And there are no close up pictures of the underside of front bumpers on Google. Can hardly see it from 20 feet away.

 

Should have went to SpecSavers.

Posted

The first 2 pictures are of my own car, I think they give a pretty good idea of where the part would normally but if you think it'll help more here's a pic from underneath.

Sorry couldn't jack the car up to get a further away view as I've just had an op.

7F229D02-354D-410C-AFB0-379B38714BF0_zps7tnpearc.jpg

Posted

The first 2 pictures are of my own car, I think they give a pretty good idea of where the part would normally but if you think it'll help more here's a pic from underneath.

Sorry couldn't jack the car up to get a further away view as I've just had an op.

7F229D02-354D-410C-AFB0-379B38714BF0_zps7tnpearc.jpg

 

Looks fine to me. Did you click the big photo I posted?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...