Jump to content

Buy Cheap and Wrap or wait for the right colour....?


Recommended Posts

Posted

I wanted a white Z... I bought a silver one wrapped white.

 

Saved up for a respray due to hating it from not long after purchase - no real shine, depth or quality to it, seams everywhere.

 

I'm pretty sure it's made the rust on my rear arches worse by holding moisture in.

 

Don't do it!

 

How much would it be for a respray Cal?

  • Like 1
Posted

I wanted a white Z... I bought a silver one wrapped white.

 

Saved up for a respray due to hating it from not long after purchase - no real shine, depth or quality to it, seams everywhere.

 

I'm pretty sure it's made the rust on my rear arches worse by holding moisture in.

 

Don't do it!

 

 

Exactly my concerns!

  • Like 1
Posted

Where is Zippypooz when you need him. Forum member on here who is a wrapper by trade and highly regarded in the South East..

Posted

Here I am!!! £2700 sounds a lot but depends on the vinyl, colours vary quite a lot depending on what you want and what make. As for saying 'I don't do wraps', unfortunately there's a lot of shite wrappers out there, wraps should never have a seam. I'd suggest whoever did it isn't a wrapper or is a shite one!! We usually charge around £1800-£2000 for a wrap. What material did they quote you for and what make!!??

Posted

I wanted a white Z... I bought a silver one wrapped white.

 

Saved up for a respray due to hating it from not long after purchase - no real shine, depth or quality to it, seams everywhere.

 

I'm pretty sure it's made the rust on my rear arches worse by holding moisture in.

 

Don't do it!

 

How much would it be for a respray Cal?

Circa 2.5k mate I think is the going rate, would be more usually for me as I'm having loads fitted... But it's a mate so I'm getting it cheaper.
  • Like 1
Posted

I wanted a white Z... I bought a silver one wrapped white.

 

Saved up for a respray due to hating it from not long after purchase - no real shine, depth or quality to it, seams everywhere.

 

I'm pretty sure it's made the rust on my rear arches worse by holding moisture in.

 

Don't do it!

 

How much would it be for a respray Cal?

Circa 2.5k mate I think is the going rate, would be more usually for me as I'm having loads fitted... But it's a mate so I'm getting it cheaper.

 

I'd rather have a respray than a wrap personally, and if there's not that much difference in the cost then I'd go for the respray. £2700 does sound a lot for a wrap though.

Posted

I was going to do the same with the 350 - Wanted Azure, but they were always 2k more than silver. - So almost went and got a silver one and have it wrapped.

But then went with a different colour all along :lol:

 

I went for azure price wise silver black grey wher much the same orange was 500 less blue was 500 more for same miles and age.

 

 

Posted
Here I am!!! £2700 sounds a lot but depends on the vinyl, colours vary quite a lot depending on what you want and what make. As for saying 'I don't do wraps', unfortunately there's a lot of shite wrappers out there, wraps should never have a seam. I'd suggest whoever did it isn't a wrapper or is a shite one!! We usually charge around £1800-£2000 for a wrap. What material did they quote you for and what make!!??

 

I got another quote from Yianimizze in North East London at 1.7k for the Hexis wrap red satin chrome according to posts put up earlier they are one of the best in the business. So the rust thing stated previously is due to a crap job u think?

 

 

Sent from my iPhone using Tapatalk

Posted
Horrid

 

Each to their own mate..prob is I've looked online and it's very light coloured on images put up there I think there may be some photoshopping goin on with the lighting in this pic

 

 

 

Sent from my iPhone using Tapatalk

Posted
Here I am!!! £2700 sounds a lot but depends on the vinyl, colours vary quite a lot depending on what you want and what make. As for saying 'I don't do wraps', unfortunately there's a lot of shite wrappers out there, wraps should never have a seam. I'd suggest whoever did it isn't a wrapper or is a shite one!! We usually charge around £1800-£2000 for a wrap. What material did they quote you for and what make!!??

 

I got another quote from Yianimizze in North East London at 1.7k for the Hexis wrap red satin chrome according to posts put up earlier they are one of the best in the business. So the rust thing stated previously is due to a crap job u think?

 

 

Sent from my iPhone using Tapatalk

Be careful of hexis at the moment, theyre admitting to a lot of failing material (apparently). Check with THEM (Hexis) first. We only use 3m or my favourite, Avery Supreme.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...