Help with offset and wheels please

[Bodyboarder81]

Hi all , hope everyone has had a good weekend

 

When I bought my 2nd zed I said I wasn't going to mod it but its kicked in again ( zeditus) and now I'm looking at some new wheels ... My options are rota gtr ...... Had them before from cs , great looking wheel which in my opinion suit the zed really well , this ones easy as I'd go for 19" 9/10 " with et 20 245/275 tyre

 

And then I've seen the varrstoen es1 ( same as humpy) and really like the look of them! These come in more options ..... So I'm thinking 19" with the front 9.5 et 12 and rear 10.5 et 12 ...... What tyre size should I be running with this set up ? I'm guessing I'm going to have to role the arches ? I'm on tein s springs ...

 

Would appreciate some thoughts on this and comments from people in the know

 

Thanks again

 

[KyleR]

Same sized tyres and I'm pretty sure on Teins you'll be fine

 

BTW, I don;t know about Rota GTR's specifically, but Rota do do smaller offsets than 20

[Z_Lover]

Maybe this site can give u a little help,............... "Play" with specs , try different settings, compare results, see differences

 

 

http://www.rimsntires.com/specspro.jsp

[Bodyboarder81]

Same sized tyres and I'm pretty sure on Teins you'll be fine

 

BTW, I don;t know about Rota GTR's specifically, but Rota do do smaller offsets than 20

 

What size and spec are you running mate?

[Bodyboarder81]

Just seen your sig!

 

What et and tyre size you running on ? Any chance of putting a pic up ?

 

Thanks for your help

[Desey]

dont go lower than et20 with anything over 10j, im running 10j rear et12 and have had to have arches rolled, and i still need to have at least -2 camber for them to fit.

 

obviously im lower but i wouldnt say it was slammed.

 

driving fast atm means ruined arches for me!

[Bodyboarder81]

dont go lower than et20 with anything over 10j, im running 10j rear et12 and have had to have arches rolled, and i still need to have at least -2 camber for them to fit.

 

obviously im lower but i wouldnt say it was slammed.

 

driving fast atm means ruined arches for me!

 

What suspension are you on mate? Put a pic up if you can , would love to see it

[Jetpilot]

dont go lower than et20 with anything over 10j, im running 10j rear et12 and have had to have arches rolled, and i still need to have at least -2 camber for them to fit.

 

obviously im lower but i wouldnt say it was slammed.

 

driving fast atm means ruined arches for me!

 

I am running a 11j et20 with a roll and -1 degree of camber on Eibach springs, no issues at all on a 275/35, what size tyre do you have in?

[Desey]

dont go lower than et20 with anything over 10j, im running 10j rear et12 and have had to have arches rolled, and i still need to have at least -2 camber for them to fit.

 

obviously im lower but i wouldnt say it was slammed.

 

driving fast atm means ruined arches for me!

 

I am running a 11j et20 with a roll and -1 degree of camber on Eibach springs, no issues at all on a 275/35, what size tyre do you have in?

 

ill upload a pic tomorrow, youll see

 

also im lower than the eibachs, on Meister-R Zeta R

[KyleR]

I'm et20 all round with 245/35 front and 275/35 rear and a drop of about 30mm.

 

Click the link in my signature to see a few pics

[docwra]

Maybe this site can give u a little help,............... "Play" with specs , try different settings, compare results, see differences

 

 

http://www.rimsntires.com/specspro.jsp

 

Not really going to tell you if you need arch work though. www.rimtuck.com is much better for what will work and what will need work

[Z_Lover]

Maybe this site can give u a little help,............... "Play" with specs , try different settings, compare results, see differences

 

 

http://www.rimsntires.com/specspro.jsp

 

Not really going to tell you if you need arch work though. www.rimtuck.com is much better for what will work and what will need work

 

All suggestions are welcome ,mate,...........didn`t know that page till now

 

Thanx