KyleR Posted June 1, 2014 Posted June 1, 2014 Right, I need to remove the MAF, easy enough, right? It's only held in with 2 screws, torx screws, but still screws, it's ok, I have torx bits. But ah ha, I'm wrong, they're not torx screws, they're exactly the same but have a pin in the middle, so your torx bits would need to be hollow! What the hell?! So how do people get these screws out? Assuming these weird hollow torx bits are almost none existent in the retail world... Quote
jimboy2 Posted June 1, 2014 Posted June 1, 2014 They will be security screws and easy enough to get hold of. I got a Bosch bit set from B&Q a few months ago for a tenner which has them included. Should be able to find them in hardware/maplin tho Quote
ilogikal1 Posted June 1, 2014 Posted June 1, 2014 Those bits are readily available in the retail world, for example; http://www.machinemart.co.uk/shop/product/details/pro-39-8-pce-tx-tamper-proof-bit-set Should be able to pick up a set easily enough, unless someone close to you has one they can lend you. Quote
KyleR Posted June 1, 2014 Author Posted June 1, 2014 Right, so they can be bought, but what about if you don't have any? Any ideas how to remove? Quote
ZMANALEX Posted June 1, 2014 Posted June 1, 2014 You require the correct tool. Source as above. Alex. Quote
KyleR Posted June 1, 2014 Author Posted June 1, 2014 Got it sorted by butchering them with pliers Thanks everyone 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.