simon da silva Posted November 6, 2013 Share Posted November 6, 2013 (edited) SOLD SOLD SOLD!!! So guys. Since we've got a baby comming in the start of 2014, im not going to be able to do my planned NA engine build anyways, so im going to sell of some of the goodies i've got left over. First off is my slightly used Tomei Poncams. They have got around 2000km on them and i got them of a friend of mine who toke his 350z back to stock and sold it. These retails for around £1000 I'd like to get around £670 for these GET A SPECIAL DEAL! BUY THESE TOGETHER WITH MY Wiseco 11.1:1 forged piston kit + Eagle forged connecting rod GET EVERYTHING FOR £1000 Here is what Tomei is writing. Tomei 143064 Poncam 264-10.8mm G2 Camshafts 03-06 Nissan 350Z VQ35DE Tomei Poncam camshafts are designed as a "drop in application!", No dialling in required as the nock-pin has been pre-set so that the timing is set for you. Tomei Poncams are designed to work with the standard valve springs and offer the best drop in performance gain for both street and track use. These cams will work with the OEM ECU settings and aftermarket ECU if you want more customised settings. Features: Years: 03-06 Non Rev-Up Motors only Poncam VQ35DE Duration: 264; Lift: 10.8 Cams are in perfect condition, with no marks, scratches etc. Edited April 28, 2014 by simon da silva Link to comment Share on other sites More sharing options...
Arran Posted November 6, 2013 Share Posted November 6, 2013 Oh god why come up now Link to comment Share on other sites More sharing options...
Y23DRH Posted November 6, 2013 Share Posted November 6, 2013 What sort of power increse will you get from these ? Link to comment Share on other sites More sharing options...
simon da silva Posted November 6, 2013 Author Share Posted November 6, 2013 20-30hp estimated.. you dont need a tune to run these but its recommended to gain the full potential of the cams Link to comment Share on other sites More sharing options...
friendy Posted November 6, 2013 Share Posted November 6, 2013 I am no mechanic, how long and easy would these to fit for a mechanic? Might be bullying a mate into fitting them. Link to comment Share on other sites More sharing options...
simon da silva Posted November 6, 2013 Author Share Posted November 6, 2013 its not a very easy task, so i would deffently have the car sent to a mechanic. You will need to remove the timing chain etc, to replace the cams. plus some other stuff from the engine. i belive the workshop manual has it set to 4-6 hour job for a mechanic.. Link to comment Share on other sites More sharing options...
Tomb Posted November 6, 2013 Share Posted November 6, 2013 (edited) I need these and the pistons and rods you've got for sale ... Can you do a combined price for both? If so please pm me Edited November 6, 2013 by Tomb Link to comment Share on other sites More sharing options...
simon da silva Posted November 6, 2013 Author Share Posted November 6, 2013 I need these and the pistons and rods you've got for sale ... Can you do a combined price for both? If so please pm me You got PM Link to comment Share on other sites More sharing options...
simon da silva Posted November 7, 2013 Author Share Posted November 7, 2013 I need these and the pistons and rods you've got for sale ... Can you do a combined price for both? If so please pm me Tomb did you get my PM? Link to comment Share on other sites More sharing options...
Tomb Posted November 7, 2013 Share Posted November 7, 2013 Yes mate just going to have a chat with a few mates (mechanics) about fitting ect. And il get back to you bud Link to comment Share on other sites More sharing options...
simon da silva Posted November 7, 2013 Author Share Posted November 7, 2013 Allright cheers! Link to comment Share on other sites More sharing options...
simon da silva Posted November 11, 2013 Author Share Posted November 11, 2013 Bump to the top. Taking resonable offers! Need this gone since we're moving very very soon! Link to comment Share on other sites More sharing options...
simon da silva Posted November 14, 2013 Author Share Posted November 14, 2013 These retails for around £1000 I'd like to get around £670 for these GET A SPECIAL DEAL! BUY THESE TOGETHER WITH MY Wiseco 11.1:1 forged piston kit + Eagle forged connecting rod GET EVERYTHING FOR £1000 Link to comment Share on other sites More sharing options...
R35LEE Posted November 14, 2013 Share Posted November 14, 2013 Do and ebay 'special gift free included' promo too Simon Link to comment Share on other sites More sharing options...
simon da silva Posted November 21, 2013 Author Share Posted November 21, 2013 Nobody building an awesome machine this winther? Link to comment Share on other sites More sharing options...
Arran Posted November 24, 2013 Share Posted November 24, 2013 Id love them but having just spent xxxx on manifolds, clutch and flywheel, oil cooler and rocker covers. If they are still about in a couple months id be interested, highly doubt they would be though Link to comment Share on other sites More sharing options...
Paddy78 Posted November 24, 2013 Share Posted November 24, 2013 Arran, arent you supercharged? I thought these cams (11.1.1) were for NA only? Obviously if you're not charged, then irrelevant. Link to comment Share on other sites More sharing options...
Arran Posted November 24, 2013 Share Posted November 24, 2013 No not supercharged me, big job this would be though bigger than the manifolds that went on yesterday Link to comment Share on other sites More sharing options...
simon da silva Posted November 24, 2013 Author Share Posted November 24, 2013 You can use the Cams for both NA and FI, no biggy.. Link to comment Share on other sites More sharing options...
lewisdavid_ Posted November 30, 2013 Share Posted November 30, 2013 any idea when my sub build will be coming? Link to comment Share on other sites More sharing options...
simon da silva Posted December 1, 2013 Author Share Posted December 1, 2013 any idea when my sub build will be coming? Check your PM mate Link to comment Share on other sites More sharing options...
simon da silva Posted December 4, 2013 Author Share Posted December 4, 2013 Buy yourself a christmas present! Link to comment Share on other sites More sharing options...
Ron-z Posted February 26, 2014 Share Posted February 26, 2014 Are these still for sale???? Link to comment Share on other sites More sharing options...
simon da silva Posted March 9, 2014 Author Share Posted March 9, 2014 Still avalible! PM Me your offer Link to comment Share on other sites More sharing options...
Arran Posted March 19, 2014 Share Posted March 19, 2014 These are for a revup not a DE, shame as i wanted these. The G1 cams are for the DE, G2 for revup and G3 for HR Damn Link to comment Share on other sites More sharing options...
Recommended Posts