SteveW Posted March 9, 2013 Posted March 9, 2013 Just wondering what is the best/easiest way to run a cable from the engine bay into the cabin? Is there a hole already in the bulk head that can be used? If so where should I go looking? I'm planning on using the cables as the loom for an oil temp gauge. Thank you Steve Quote
evilscorp Posted March 9, 2013 Posted March 9, 2013 I go through the battery compartment, easy to reach from the passenger footwell area. if you remove the plastic trim below the windscreen in the battery area you will see where the loom enters through. 2 Quote
DoogyRev Posted March 9, 2013 Posted March 9, 2013 +1 You might find some pics on this thread to assist you . . . although 76 pages http://www.350z-uk.com/topic/52481-project-zee-business-all-change-17th-jan/ 1 Quote
spursmaddave Posted March 9, 2013 Posted March 9, 2013 Yep I have run power to both my amps through a space behind the battery into the footwell then behind the passenger side trim and along under the door sill trim 1 Quote
SteveW Posted March 9, 2013 Author Posted March 9, 2013 Thank you , much appreciated. I'll check it out today. Quote
Sam Mcgoo Posted March 9, 2013 Posted March 9, 2013 Where are you mounting your gauges ? The reason I ask, is mine are on the drivers A-pillar and cubby so went in on the drivers side for a shorter run. There is a big rubber grommet just behind the ABS module that brings you into the drivers foot-well behind the dash. Can be seen in the far left corner of this pic. - Quote
samsniss350z Posted March 10, 2013 Posted March 10, 2013 (edited) Hey Sam, I'm loving the look of your green bonnet dampers and i just love the Kinetix plenum. Edited March 10, 2013 by samsniss350z Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.