Chris AME Posted December 28, 2012 Share Posted December 28, 2012 I'm looking into some headers, yes I know they are a pain to install and expensive compared to gains but that's not my question. I have a couple of options in mind: Stillen or Tomei read good things about both, but unsure on the clearance due to RHD/LHD steering column Any advice is appreciated Quote Link to comment Share on other sites More sharing options...
Keyser Posted December 28, 2012 Share Posted December 28, 2012 I can tel you that Stillen fit with no issues - but the heat shield does not fit back on, if/when my engine is next out I will add a shield over the fuel lines - I have swapped to braided lines and it's more an issue for Turbos due to more zorst heat. I also went for ceramic coated. Quote Link to comment Share on other sites More sharing options...
Dblock Posted December 28, 2012 Share Posted December 28, 2012 This may not be helpful but I've got some DC's and they fit fine. Quote Link to comment Share on other sites More sharing options...
Chris AME Posted December 28, 2012 Author Share Posted December 28, 2012 (edited) Cheers buddy, Stillen are my preference currently as they are a known quantity Edit: I'm considering these too as they seem a good deal, what was the quality like out of interest? Edited December 28, 2012 by atkin666 Quote Link to comment Share on other sites More sharing options...
Dblock Posted December 28, 2012 Share Posted December 28, 2012 I bought Dc's and the no name ones at the same time. The Dc's where quite clean on the inside and seemed like they where really good quality. The no names was a design copy but there was a difference in quality but saying that comparing Dc's to Chinese copies inst a testament to quality either nor am I an expert but they seemed good. Quote Link to comment Share on other sites More sharing options...
Ian Posted December 28, 2012 Share Posted December 28, 2012 Tomei will be amazing quality & will fit RHD no probs I had DCs on mine & they were good quality Quote Link to comment Share on other sites More sharing options...
Chris AME Posted December 28, 2012 Author Share Posted December 28, 2012 Tomei will be amazing quality & will fit RHD no probs I had DCs on mine & they were good quality The Tomei stuff for rb26 is amazing, that's what led me to them Quote Link to comment Share on other sites More sharing options...
Ian Posted December 28, 2012 Share Posted December 28, 2012 I had Tomei decats on my Z, amazing quality Quote Link to comment Share on other sites More sharing options...
rtbiscuit Posted December 28, 2012 Share Posted December 28, 2012 DC are meant to be good, tomei and stillen also great makes. its just a case of picking what you prefer as the performance difference between them will be negligible. although all will have a positive impact on the cars performance. Quote Link to comment Share on other sites More sharing options...
Wasso Posted December 29, 2012 Share Posted December 29, 2012 Tomei will be amazing quality & will fit RHD no probs I had DCs on mine & they were good quality +1 the Tomei are very popular in the states. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.