theheff Posted July 14, 2012 Share Posted July 14, 2012 guys I'm looking at a dremel, want it to help with the tight areas of surface rust in my van project, plus ill possibly need it to get my rear drop links off, plus I'm sure ill find loads of over things to use it for. those of you with them, did you go for wired or wireless and did you find you'd have been better off with the other? I'm looking at it along the lines of if i had the wired one ill be cursing the bastard wire vein in the way, but having the wireless one id have to keep charging it. wired one (dremel 3000) is about £60 with the flexi, the wireless one (dremel 8200) is about £95 without the flexi. Quote Link to comment Share on other sites More sharing options...
DannyBoy Posted July 14, 2012 Share Posted July 14, 2012 I'd get a wired one mate, I have the dremel 8200 cordless and it really only lasts an hour or so of decent work and then takes at least an hour to recharge. It's also really back-heavy because of the battery. Really not sure why i didn't just get the wired one but it seemed a good idea at the time DB Quote Link to comment Share on other sites More sharing options...
DoogyRev Posted July 14, 2012 Share Posted July 14, 2012 Wired all the way Quote Link to comment Share on other sites More sharing options...
theheff Posted July 14, 2012 Author Share Posted July 14, 2012 thats why i asked. i knew if i just went for the wireless one id be wishing i hadn't awesome, its cheaper aswell, gonna need a long old extension lead though. i wish i had a garage Quote Link to comment Share on other sites More sharing options...
ace Posted July 14, 2012 Share Posted July 14, 2012 Dremel are crap don't waste your money on one unless it's a tool that will be rarely used I have been playing with R/C stuff for over 20 years and have got through loads of Dremels mainly the bearing in the shaft wears out and they vibrate not good for very small drill bits or precision work. Pay a bit more and buy a Proxxon there German made and of a higher quility since I bought mine some 8 years ago it's been faultless http://www.proxxon-direct.com/acatalog/ ... r_ibe.html http://www.proxxon-direct.com/?gclid=CK ... tAodK24cRg Quote Link to comment Share on other sites More sharing options...
theheff Posted July 14, 2012 Author Share Posted July 14, 2012 by the time I've added the flexi, which i will need, it comes in at nearly £120. thats double the dremel. it will be used on and off really so think the dremel will be alright. there are some smaller proton ones on ebay but without having read about them they seem like they'll be more suited to delicate stuff like your r/c stuff. Quote Link to comment Share on other sites More sharing options...
marzman Posted July 14, 2012 Share Posted July 14, 2012 Just buy one of the bargain dremmel knock-offs that they sell. Aldi are selling one this week for £12! I bought a £20 dremmel knockoff from Wolworths about 6 years ago, and it's still going strong (and it came with a flexi adapter). Probably had maybe 20 hours solid use out of it during that time. For drop links and areas of rust however, you're better off with an angle grinder than a dremmel... you'll be there all day. Quote Link to comment Share on other sites More sharing options...
Ekona Posted July 15, 2012 Share Posted July 15, 2012 Agree with Marzman and Ace on this, either buy a cheapy cheapy one and expect to replace it fairly quickly, or buy a really good one and stick with it for life. Definitely stick with wired though, dremels aren't much cop on the really big stuff and if you do need to use it outside you can always run an extension cable. Quote Link to comment Share on other sites More sharing options...
ace Posted July 15, 2012 Share Posted July 15, 2012 I agree, if you think your going to be cutting off rusty nuts and bolts on the car with a Dremel forget it, go to Selco builders merchants there selling 3" angle grinders for a tenner at the moment. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.