introspect Posted April 18, 2012 Posted April 18, 2012 Well the time has come to move the Zed on in favour of something cheaper to run so I'm having a little part out of all the mods I've put on over the years, so here goes: Samco black silicone intake hose £40 delivered OR NEAREST OFFER Mongoose decats including o2 spacers from ZMANALEX to prevent an engine warning light appearing with these fitted. These are the same design as the Berk decats with the brackets fitted for proper OEM fittment £70 delivered SOLD CG Seatbelt Lock - Most of the benefits of a harness without the hassle! £30 delivered SOLD KTA Gear Knob. Brushed aluminium finish with the 350z logo etched onto the side and shift pattern on the top. Great condition £30 Delivered SOLD 380RS Pedal. Essential for heal and toeing, great condition £35 delivered SOLD Black Alcantara with silver stiching gear gator and handbrake cover £10 delivered SOLD Fitted picture: GT Spec Carbon Fibre strut brace £160 SOLD Carbon fibre slam panel £55 SOLD Carbon fibre engine cover (Motordyne decal can be removed if desired) £55 SOLD Carbon fibre battery and brake fluid surrounds £50 SOLD Motordyne XYZ pipe with high flow cat and a straight through pipe giving you the choice of which to run. Only used for a few thousand miles. This setup goes very nicely with the decats £375 SOLD Motordyne MREV2 lower collector. This is a must have item for anyone with the MY06 REVUP engine as it gives a nice mid range boost in torque. £210 SOLD Motordyne 5/16 plenum spacer with all fittings £90 SOLD Nismo Type 1 oil cap £30 SOLD Nismo Radiator cap £15 SOLD Quote
Plummerman Posted April 18, 2012 Posted April 18, 2012 I'll take the oil and rad cap matey.. Pm is on the way Quote
marzman Posted April 18, 2012 Posted April 18, 2012 2nd dibs on the slam panel if it becomes available again. That's exactly what I've been after for ages. Quote
Dragonball Posted April 18, 2012 Posted April 18, 2012 Put me down for the Motordyne 5/16 plenum spacer with all fittings Let me know what you would do for this and the Motordyne MREV2 lower collector combined please Cheers Quote
Dragonball Posted April 18, 2012 Posted April 18, 2012 Just a quick one - realised I have a 55 Roadster - not sure the Motordyne MREV2 lower collector will be ok? Quote
introspect Posted April 18, 2012 Author Posted April 18, 2012 Just a quick one - realised I have a 55 Roadster - not sure the Motordyne MREV2 lower collector will be ok? The spacer has gone I'm afraid. The MREV2 isn't needed for the DE engine, only for the REVUP 296bhp engine Quote
ric Posted April 19, 2012 Posted April 19, 2012 Can't believe this, the one day I don't check the forum stuff comes up i've been looking for for ages!!!! If the strut brace and/or brake/battery surrounds become available i'll definatley have them. Thanks, Quote
CrustyCrab Posted April 25, 2012 Posted April 25, 2012 XYZ pipe received. This may sound like eBay feedback but I just wanted to say it was a pleasure dealing with you. Nicely packed and next day delivery. Thanks very much. I'll post some piccys when I get a chance to install it Cheers Quote
JT350GT4 Posted April 27, 2012 Posted April 27, 2012 Where did you get the carbon slam panel and brake/batter surrounds from? Been looking for these for a while and didn't want ebay cheapies? Quote
introspect Posted April 27, 2012 Author Posted April 27, 2012 Where did you get the carbon slam panel and brake/batter surrounds from? Been looking for these for a while and didn't want ebay cheapies? Slam Panel was from EP Racing. Brake and battery surrounds were from a member on here who was making them at the time. Quote
JT350GT4 Posted April 27, 2012 Posted April 27, 2012 Slam Panel was from EP Racing. Brake and battery surrounds were from a member on here who was making them at the time. I'm watching the exact same slam panel from them atm on ebay for a 'reduced' price of £120.72. Apparently from £142. Looks like it'll have to be that one thanks for confirming that anyway. Quote
introspect Posted April 30, 2012 Author Posted April 30, 2012 BUMP De-cats, Intake hose and harness pads still available Quote
sukh13 Posted May 15, 2012 Posted May 15, 2012 Will take the pedal at asking if it is still for sale! Quote
uc-logic Posted May 31, 2012 Posted May 31, 2012 If th e mongoose decats are still available I will be glad to have them - just send the payment details please. Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.